| *1 | HEADLIGHT ECU LH | - | - |
|
N*m (kgf*cm, ft.*lbf): Specified torque | - | - |
| ● | Non-reusable part | - | - |
Use the same procedure for the RH and LH sides.
The procedure listed below is for the LH side.
1.INSTALL HEADLIGHT GASKET
2.INSTALL HEADLIGHT ECU SUB-ASSEMBLY LH
81165 3.REMOVE HEADLIGHT CORD LH
81156A 4.REMOVE HEADLIGHT BRACKET LH
5.INSTALL HEADLIGHT ASSEMBLY LH
6.PERFORM SYSTEM INITIALIZATION
7.ADJUST HEADLIGHT AIMING