1.DRAIN ENGINE COOLANT
2.DRAIN ENGINE OIL
22100 3.REMOVE INJECTION PUMP ASSEMBLY
15601 4.REMOVE OIL FILTER SUB-ASSEMBLY
11452 5.REMOVE ENGINE OIL LEVEL DIPSTICK GUIDE
Remove the engine oil level dipstick.
Remove the bolt and engine oil level dipstick guide.
Remove the O-ring from the engine oil level dipstick guide.
89422A 6.REMOVE ENGINE COOLANT TEMPERATURE SENSOR
16261 7.DISCONNECT WATER BY-PASS HOSE (w/ High Altitude Compensator)
Slide the clamp and disconnect the water by-pass hose from the oil cooler cover.
15721 8.REMOVE OIL COOLER COVER
|
Bolt |
|
Nut |
Remove the 13 bolts, 2 nuts, oil cooler cover and gasket.
15710 9.REMOVE OIL COOLER ASSEMBLY
Loosen the 4 nuts.
Partially tap out the oil cooler assembly by tapping each nut head with a plastic-faced hammer.
Remove the 4 nuts, oil cooler assembly and 2 gaskets.