77011 1.INSTALL FUEL TANK FILLER LOWER PIPE SUB-ASSEMBLY
Install a new gasket to the fuel tank filler lower pipe sub-assembly.
Install the fuel tank filler lower pipe sub-assembly with the 6 screws to the fuel tank assembly.
77203B 2.INSTALL FUEL SUCTION TUBE SUB-ASSEMBLY
Install a new gasket to the fuel suction tube sub-assembly.
Install the fuel suction tube sub-assembly with the 7 screws to the fuel tank assembly.
Install the nut.
83320 3.INSTALL FUEL SENDER GAUGE ASSEMBLY
4.INSTALL FUEL HOSE
Install the fuel inlet hose to the fuel tank filler lower pipe sub-assembly and tighten the clamp to secure the hose.
Install the fuel breather hose to the fuel tank assembly and slide the clamp to secure the hose.
Install the fuel evaporation hose to the fuel tank assembly and slide the clamp to secure the hose.
Install the fuel return hose to the fuel suction tube sub-assembly and slide the clamp to secure the hose.
77100 5.INSTALL FUEL TANK ASSEMBLY
Set the fuel tank assembly and No. 1 fuel tank protector sub-assembly on an engine lifter.
Raise the engine lifter.
Install the 2 fuel tank bands with the 2 pins.
Connect the 2 fuel tank bands with the 2 bolts.
Connect the fuel sender gauge connector.
Connect the fuel pump connector.
77278A 6.CONNECT FUEL EVAPORATION HOSE
Connect the fuel evaporation hose to the No. 2 fuel main tube and slide the clamp to secure the hose.
77100D 7.CONNECT FUEL BREATHER HOSE
Connect the fuel breather hose to the fuel tank inlet pipe sub-assembly and slide the clamp to secure the hose.
77213 8.CONNECT FUEL INLET HOSE
Connect the fuel inlet hose to the fuel tank inlet pipe sub-assembly and tighten the clamp to secure the hose.
9.CONNECT FUEL RETURN HOSE
Connect the fuel return hose to the No. 2 fuel main tube and slide the clamp to secure the hose.
10.CONNECT FUEL MAIN HOSE
Connect the fuel main hose to the fuel suction tube sub-assembly.
Click hereEngine / Hybrid System>1GR-FE (FUEL)>FUEL SYSTEM>PRECAUTION
11.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
12.INSPECT FOR FUEL LEAK