Home › Drivetrain › AXLE AND DIFFERENTIAL › FRONT DIFFERENTIAL CARRIER ASSEMBLY (for Standard) › 2014.08–2016.08
RM25T0E _52 Drivetrain _029907 AXLE AND DIFFERENTIAL _0136706 FRONT DIFFERENTIAL CARRIER ASSEMBLY(for Standard) A

AXLE AND DIFFERENTIAL  FRONT DIFFERENTIAL CARRIER ASSEMBLY(for Standard)  INSTALLATION  


PROCEDURE

Hide 41110F 1.INSTALL FRONT DIFFERENTIAL CARRIER ASSEMBLY

a.

Install a new gasket.


b.
C311238

Install the front differential carrier assembly with the 10 nuts and 10 washers.

Torque:
25 N*m (255 kgf*cm, 18 ft.*lbf)

HINT:

Remove any foreign matter (dirt, gasket remains, metal particles, etc.) from the contact surfaces of the housing and differential carrier and install a new gasket.



Hide 2.INSTALL FRONT AXLE SHAFT ASSEMBLY

Hide 3.INSTALL FRONT BRAKE TUBE (w/o ABS)

a.

for 1HZ:

C311243C01
1.375,1.146 1.688,1.344 0.313,0.198 10 false *a
*a Torque Wrench Fulcrum Length - -


i.

Install the brake tube, 3-way joint and brake hose with the 4 bolts.

Torque:
14 N*m (143 kgf*cm, 10 ft.*lbf)


ii.

Using a union nut wrench, connect each brake tube to the flexible hose while holding the flexible hose with a wrench.

Torque:
Specified tightening torque : 15.2 N*m (155 kgf*cm, 11 ft.*lbf)

HINT:
·

Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION

·

When using a union nut wrench (fulcrum length of 22 mm (0.8661 in.)) + torque wrench (fulcrum length of 300 mm (11.811 in.)): 14.2 N*m (145 kgf*cm, 10 ft.*lbf)




iii.

Install the brake tube with a new clip.



b.

for 1GR-FE:

C311244C01
1.375,1.198 1.688,1.396 0.313,0.198 10 false *a
*a Torque Wrench Fulcrum Length - -


i.

Install the brake tube, 3-way joint and brake hose with the 4 bolts.

Torque:
14 N*m (143 kgf*cm, 10 ft.*lbf)


ii.

Using a union nut wrench, connect each brake tube to the flexible hose while holding the flexible hose with a wrench.

Torque:
Specified tightening torque : 15.2 N*m (155 kgf*cm, 11 ft.*lbf)

HINT:
·

Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION

·

When using a union nut wrench (fulcrum length of 22 mm (0.8661 in.)) + torque wrench (fulcrum length of 300 mm (11.811 in.)): 14.2 N*m (145 kgf*cm, 10 ft.*lbf)




iii.

Install the brake tube with a new clip.



Hide 4.INSTALL FRONT BRAKE TUBE (w/ ABS)

a.

for 1HZ, 1VD-FTV:

C311245C01
1.375,1.208 1.688,1.406 0.313,0.198 10 false *a 1.271,1.604 1.583,1.802 0.313,0.198 10 true A 3.344,1.875 3.656,2.073 0.313,0.198 10 true A 6.063,1.542 6.219,1.74 0.156,0.198 10 true A 4.604,0.813 4.792,1 0.188,0.188 10 true B
*a Torque Wrench Fulcrum Length - -


i.

Install the brake tube with the 5 bolts.

Torque:
Bolt A : 14 N*m (143 kgf*cm, 10 ft.*lbf)
Bolt B : 25 N*m (255 kgf*cm, 18 ft.*lbf)


ii.

Using a union nut wrench, connect each brake tube to the flexible hose while holding the flexible hose with a wrench.

Torque:
Specified tightening torque : 15.2 N*m (155 kgf*cm, 11 ft.*lbf)

HINT:
·

Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION

·

When using a union nut wrench (fulcrum length of 22 mm (0.8661 in.)) + torque wrench (fulcrum length of 300 mm (11.811 in.)): 14.2 N*m (145 kgf*cm, 10 ft.*lbf)




iii.

Install the brake tube with 2 new clips.



b.

for 1GR-FE:

C311246C01
5.594,1.083 5.906,1.281 0.313,0.198 10 false *a
*a Torque Wrench Fulcrum Length - -


i.

Install the brake tube with the 3 bolts.

Torque:
14 N*m (143 kgf*cm, 10 ft.*lbf)


ii.

Using a union nut wrench, connect each brake tube to the flexible hose while holding the flexible hose with a wrench.

Torque:
Specified tightening torque : 15.2 N*m (155 kgf*cm, 11 ft.*lbf)

HINT:
·

Calculate the torque wrench reading when changing the fulcrum length of the torque wrench.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION

·

When using a union nut wrench (fulcrum length of 22 mm (0.8661 in.)) + torque wrench (fulcrum length of 300 mm (11.811 in.)): 14.2 N*m (145 kgf*cm, 10 ft.*lbf)





Hide 37140 5.INSTALL FRONT PROPELLER SHAFT ASSEMBLY