Home › Drivetrain › AXLE AND DIFFERENTIAL › DIFFERENTIAL LOCK ECU (w/ Differential Lock) › 2014.08–2022.09
RM25T0E _52 Drivetrain _029907 AXLE AND DIFFERENTIAL _0137254 DIFFERENTIAL LOCK ECU(w/ Differential Lock) A

AXLE AND DIFFERENTIAL  DIFFERENTIAL LOCK ECU(w/ Differential Lock)  REMOVAL  


PROCEDURE

Hide 1. PRECAUTION

CAUTION:

Be sure to read precaution thoroughly before servicing.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>PRECAUTION


NOTICE:

After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal. Therefore, make sure to read the disconnecting the cable from the negative (-) battery terminal notices before proceeding with work.

Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION


Hide 2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL

CAUTION:

Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.


Hide 62111A 4.REMOVE COWL SIDE TRIM SUB-ASSEMBLY RH

Hide 89661 5.REMOVE ECM (for 1GR-FE LHD)

Hide 89533A 6.REMOVE NO. 2 4 WHEEL DRIVE CONTROL ECU

a.
C308019

Disconnect the connector.


b.

Remove the 2 nuts and No. 2 4 wheel drive control ECU.