1.DRAIN TRANSFER OIL
37110 2.REMOVE PROPELLER SHAFT ASSEMBLY
36104 3.REMOVE TRANSFER OUTPUT SHAFT COMPANION FLANGE (for Rear Side)
36132A 4.REMOVE OUTPUT SHAFT RETAINER OIL SEAL
Using SST, remove the output shaft retainer oil seal.
Do not to damage the oil seal and rear case contact surface.
36132A 5.INSTALL OUTPUT SHAFT RETAINER OIL SEAL
Apply MP grease to the lip of a new output shaft retainer oil seal.
Using SST and a hammer, install the output shaft retainer oil seal as shown in the illustration.
36104 6.INSTALL TRANSFER OUTPUT SHAFT COMPANION FLANGE (for Rear Side)
37110 7.INSTALL PROPELLER SHAFT ASSEMBLY
8.ADD TRANSFER OIL
9. CHECK FOR TRANSFER OIL LEAK