Home › Engine / Hybrid System › 1VD-FTV (FUEL) › FUEL TANK(for 130 L Tank) › from 2016.08
RM25T0E _51 Engine / Hybrid System _029770 1VD-FTV FUEL _0135404 FUEL TANK(for 130 L Tank) A

1VD-FTV FUEL  FUEL TANK(for 130 L Tank)  INSTALLATION  


PROCEDURE

Hide 77011 1.INSTALL LOWER FUEL TANK FILLER PIPE SUB-ASSEMBLY

a.

Install a new gasket to the lower fuel tank filler pipe sub-assembly.


b.

Install the lower fuel tank filler pipe sub-assembly to the fuel tank assembly with the 6 screws.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)


Hide 77278A 2.INSTALL FUEL EVAPORATION HOSE

a.

Install the fuel evaporation hose to the fuel tank assembly, and slide the hose clip to secure the hose.


b.

Attach the clamp to the fuel tank assembly.


Hide 3.INSTALL FUEL SUCTION TUBE ASSEMBLY

a.
A391440C01
1.188,1.719 1.375,1.885 0.188,0.167 10 true *a 1.833,0.115 2.021,0.271 0.188,0.156 10 true *b 2.292,1.083 2.479,1.24 0.188,0.156 10 true *b 2.302,0.469 2.49,0.625 0.188,0.156 10 true *b 1.229,0.26 1.417,0.417 0.188,0.156 10 true *b 1,0.76 1.188,0.917 0.188,0.156 10 true *b 1.208,1.26 1.396,1.417 0.188,0.156 10 true *b 1.875,1.427 2.063,1.583 0.188,0.156 10 true *b
*a Nut
*b Screw


Install a new gasket and the fuel suction tube assembly with the 7 screws.

Torque:
3.0 N*m (31 kgf*cm, 27 in.*lbf)


b.

Install the nut.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


Hide 77100 5.INSTALL FUEL TANK ASSEMBLY

a.

Set the fuel tank assembly and No. 1 fuel tank protector sub-assembly on an engine lifter.


b.

Raise the engine lifter.


c.
A391441C01
0.51,0.531 0.708,0.688 0.198,0.156 10 true *a 1.219,2.896 1.417,3.052 0.198,0.156 10 true *b 2.823,0.531 3.021,0.688 0.198,0.156 10 true *a 2.052,2.885 2.24,3.042 0.188,0.156 10 true *b
*a Bolt
*b Pin


Install the 2 fuel tank bands with the 2 pins.


d.

Connect the 2 fuel tank bands with the 2 bolts.

Torque:
39 N*m (398 kgf*cm, 29 ft.*lbf)


e.

Attach the wire harness clamp to the frame.


f.

Connect the fuel sender gauge connector.


Hide 77100D 6.CONNECT FUEL BREATHER HOSE

a.

Connect the fuel breather hose to the fuel tank assembly, and slide the hose clip to secure the hose.


Hide 77213 7.CONNECT INLET FUEL HOSE

a.

Connect the inlet fuel hose to the lower fuel tank filler pipe sub-assembly, and tighten the clamp to secure the hose.


Hide 8.CONNECT FUEL MAIN HOSE

a.

Connect the fuel main hose to the fuel suction tube assembly, and slide the hose clip to secure the hose.


Hide 9.CONNECT FUEL RETURN HOSE

a.

Connect the fuel return hose to the fuel suction tube assembly. and slide the hose clip to secure the hose.