71512S 1.INSTALL SEPARATE TYPE FRONT SEAT CUSHION PAD (OCCUPANT DETECTION SENSOR)
Set the separate type front seat cushion cover to the separate type front seat cushion pad.
Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 18 new hog rings in the order shown in the illustration.
| *a | Hog Ring Pliers | *b | Cutout |
Be careful not to damage the separate type front seat cushion cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.
Install the hog rings at the cutouts if they are there.
Using hog ring pliers, install the separate type front seat cushion cover to the separate type front seat cushion pad with 2 new hog rings
| *a | Hog Ring Pliers | - | - |
Be careful not to damage the separate type front seat cushion cover.
Be sure to securely install the hog rings as shown in the illustration while preventing wrinkles from forming on the separate type front seat cushion cover.
2.INSTALL SEPARATE TYPE FRONT SEAT CUSHION COVER WITH PAD
Use the same procedure described for the Driver side.
73240 3.INSTALL FRONT SEAT INNER BELT ASSEMBLY LH
71862 4.INSTALL FRONT SEAT INNER CUSHION SHIELD LH
Use the same procedure described for the Driver side.
71812D 5.INSTALL FRONT SEAT CUSHION SHIELD LH
Use the same procedure described for the Driver side.
72526 6.INSTALL RECLINING ADJUSTER RELEASE HANDLE LH
Use the same procedure described for the Driver side.
7.INSTALL FRONT SEAT ASSEMBLY LH
Use the same procedure described for the Driver side.