Home › General › MAINTENANCE › BRAKE › from 2016.08
RM25T0E _V1 General _029889 MAINTENANCE _0140196 BRAKE N

MAINTENANCE  BRAKE  GENERAL MAINTENANCE  


PROCEDURE

Hide 1.INSPECT BRAKE PEDAL AND PARKING BRAKE

a.

Inspect the brake pedal and parking brake.

Type See procedure
Brake pedal (Click here)
Parking brake (Click here)


Hide 2.INSPECT BRAKE LININGS AND DRUMS

a.

Inspect the rear brake linings and drums.

Type See procedure
Rear brake (for Rear Drum Brake) (Click here)
Rear brake (for Rear Disk Brake) (Click here)


Hide 3.INSPECT BRAKE PADS AND DISCS

a.

Inspect the brake pads and discs.

Type See procedure
Front brake (Click here)
Rear brake (for Rear Disk Brake) (Click here)

HINT:
·

If a squealing or scraping noise is heard from the brake while driving, check the pad wear indicator.

·

If there are traces of the indicator contacting the disc rotor, the disc pad should be replaced.




Hide 4.INSPECT BRAKE LINE PIPES AND HOSES

HINT:

Work in a well-lighted area. Turn the front wheels fully to the right or left before beginning the inspection.


a.
P009958

Using a mirror, check the entire circumference and length of the brake lines and hoses for:

·

Damage

·

Wear

·

Deformation

·

Cracks

·

Corrosion

·

Leaks

·

Bends

·

Twists



b.

Check all the clamps for tightness and the connections for leakage.


c.

Check that the hoses and lines are not near sharp edges, moving parts or the exhaust system.


d.

Check that the lines are installed properly and pass through the center of the grommets.


Hide 5.INSPECT BRAKE FLUID

a.

Inspect the brake fluid.

Type See procedure
w/ VSC (Click here)
w/o VSC (Click here)
w/o ABS (Click here)


Hide 6.REPLACE BRAKE FLUID

a.

Replace the brake fluid.

Type See procedure
w/ VSC (Click here)
w/o VSC (Click here)
w/o ABS (Click here)


Hide 7.REPLACE VACUUM PUMP (for 1VD-FTV)

a.

Replace the vacuum pump.

Type See procedure
1VD-FTV (Click here)


Hide 8.INSPECT VACUUM PUMP (for 1HZ)

a.

Inspect the vacuum pump.

Type See procedure
1HZ (Click here)


Hide 9.INSPECT CLUTCH FLUID

a.

Inspect the clutch fluid (See page Drivetrain>CLUTCH>CLUTCH SYSTEM>BLEEDING).