When replacing an injector (including interchanging injectors between cylinders) or common rail, replace the corresponding injection pipes with new ones.
w/ DPF:
When fuel lines are disconnected, air may enter the fuel lines, leading to engine starting trouble. Therefore, perform forced regeneration and bleed the air from the fuel lines.
28100 1.INSTALL STARTER ASSEMBLY
Install the starter assembly with the 2 bolts.
Connect the 2 hoses to the starter assembly and starter hose bracket sub-assembly.
Attach the harness clamp and connect the wire harness.
Connect the starter wire to the starter assembly with the nut.
Connect the connector to the starter assembly.
23920A 2.INSTALL FUEL COOLER ASSEMBLY (w/o DPF)
25680 3.INSTALL EGR VALVE WITH EGR COOLER (w/o DPF)
25680 4.INSTALL EGR COOLER ASSEMBLY (w/ DPF)
28800 5.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
6. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART