1.INSTALL TIRE PRESSURE WARNING ECU AND RECEIVER
Connect the connector to the tire pressure warning ECU and receiver.
Attach the guide to temporarily install the tire pressure warning ECU and receiver.
Install the bolt.
2.INSTALL ROOF HEADLINING ASSEMBLY
for Double Cab: Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (for Double Cab)>INSTALLATION
for Single Cab: Click hereVehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING (for Single Cab)>INSTALLATION
3.CONNECT CABLE TO NEGATIVE BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
4. REGISTRATION OF TRANSMITTER ID
5.INSPECT TIRE PRESSURE WARNING SYSTEM
6.PERFORM INITIALIZATION
7. INITIALIZATION AFTER RECONNECTING BATTERY TERMINAL
When disconnecting and reconnecting the battery, there is an automatic learning function that completes learning when the respective system is used.
Click hereGeneral>SETUP>WHEN DISCONNECTING OR RECONNECTING BATTERY TERMINAL>AUTOMATIC LEARNING CHART