1. PRECAUTION
After turning the ignition switch off, waiting time may be required before disconnecting the cable from the negative (-) battery terminal.
Click hereGeneral>INTRODUCTION>REPAIR INSTRUCTION>PRECAUTION
2.DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL
3.REMOVE ENGINE COOLANT
17940D 4.REMOVE INTERCOOLER ASSEMBLY
5.REMOVE COMMON RAIL ASSEMBLY
6.REMOVE EGR VALVE WITH EGR COOLER (w/ EGR System)
23243C 7.REMOVE FUEL PUMP MOTOR WIRE
23805B 8.REMOVE NO. 5 FUEL PIPE SUB-ASSEMBLY
23274D 9.REMOVE NO. 3 FUEL HOSE
Slide the clamp and remove the No. 3 fuel hose from the fuel cooler.
16283 10.REMOVE NO. 6 WATER BY-PASS HOSE
Slide the 2 clamps and remove the No. 6 water by-pass hose from the No. 1 water by-pass pipe and fuel cooler.
23764A 11.REMOVE NO. 4 NOZZLE LEAKAGE PIPE
Slide the clamp and disconnect the No. 2 fuel hose from the fuel cooler.
Remove the union bolt and gasket.
Remove the bolt and No. 4 nozzle leakage pipe.
23763 12.REMOVE NO. 3 NOZZLE LEAKAGE PIPE
Slide the clamp and disconnect the No. 1 fuel hose from the fuel cooler.
Remove the union bolt and gasket.
Remove the bolt and No. 3 nozzle leakage pipe.
23920A 13.REMOVE FUEL COOLER
Remove the 2 bolts and fuel cooler.
16295 14.REMOVE NO. 7 WATER BY-PASS HOSE
Slide the clamp and remove the No. 7 water by-pass hose from the fuel cooler.