Home › ADAS / AD › ADVANCED DRIVER ASSISTANCE SYSTEM › AHS ECU
RM37H0E _95 ADAS / AD _095317 ADVANCED DRIVER ASSISTANCE SYSTEM _0454816 AHS ECU A

ADVANCED DRIVER ASSISTANCE SYSTEM  AHS ECU  INSTALLATION  


CAUTION / NOTICE / HINT

COMPONENTS (INSTALLATION)
E473256N02
0.49,1.177 6.583,4.906 6.094,3.729 2.708,2.635 3.427,2.635 false 2.531,3.531 3.25,3.531 false 5.146,3.063 5.146,2.5 false 3.396,1.167 3.396,0.656 3.396,0.656 3.896,0.656 false 2.521,2.531 2.802,2.885 0.281,0.354 18 false 1 3.292,3.427 3.573,3.781 0.281,0.354 18 false 2 3.927,0.521 4.208,0.875 0.281,0.354 18 false 3 5.094,3.146 5.406,3.344 0.313,0.198 10 false *1

Procedure Part Name Code
Z101186

Z101188

Z101187

1 LIGHT CONTROL LED ECU LH 85967D (Click here) - -
2 HEADLIGHT LENS SUB-ASSEMBLY LH 8110B - - -
3 HEADLIGHT ASSEMBLY LH - - - -

*1 HEADLIGHT HOUSING SUB-ASSEMBLY LH - -

CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH and LH sides.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 85967D 1.INSTALL LIGHT CONTROL LED ECU LH

Z101292

NOTICE:
·

Prevention of static electricity is required during this procedure.

·

Use static electricity countermeasures SST (desktop antistatic mat set) and observe all precautions to prevent damage to the system by electrostatic discharge (ESD).

·

Perform work using clean rubber gloves.

·

Do not touch the inner surface of the lens and metallic surfaces as much as possible, or they may become dirty.

·

Do not allow metallic surfaces to become dirty, as such surfaces become damaged even if they are only lightly wiped with a soft cloth.

·

Do not use solvent to clean components. Only clean them with a dry cloth.




SST
09890-47010  (09891-04020, 09891-04010, 09891-04030, 09891-04040)

Hide 8110B 2.INSTALL HEADLIGHT LENS SUB-ASSEMBLY LH

Hide 3.INSTALL HEADLIGHT ASSEMBLY LH