| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 1 | EV RADIATOR ASSEMBLY | 16550A | ( )
|
- | - |
| *1 | RADIATOR ASSEMBLY | - | - |
| *A | for LHD | *B | for RHD |
| *1 | RADIATOR WITH FAN | - | - |
|
N*m (kgf*cm, ft.*lbf): Specified torque | ● | Non-reusable part |
|
Compressor oil ND-OIL 11 or equivalent | - | - |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 7 | RADIATOR WITH CONDENSER | - | - | - | - |
16550A
1.INSTALL EV RADIATOR ASSEMBLY
|
Install in this Direction (1) |
|
Install in this Direction (2) |
Attach the guide and claw and install the EV radiator assembly as shown in the illustration.
Do not damage the EV radiator assembly and radiator assembly when installing the EV radiator assembly.
16697A
6.INSTALL REAR RADIATOR SIDE AIR GUIDE PLATE LH
7.INSTALL RADIATOR WITH CONDENSER