Refer to DTC C050C12.
Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM>C050C12
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area | DTC Output from | Priority | Note |
|---|---|---|---|---|---|---|
| C14E614 | Left Rear Wheel Speed Sensor Supply Voltage Circuit Short to Ground or Open | With the +BS terminal voltage 9.5 to 17.4 V, the sensor power supply voltage decreases for 0.5 seconds or more. | No. 2 skid control ECU (brake actuator assembly) | Brake/EPB | A | Output ECU: No. 2 skid control ECU (brake actuator assembly) |
| C14E914 | Right Rear Wheel Speed Sensor Supply Voltage Circuit Short to Ground or Open | With the +BS terminal voltage 9.5 to 17.4 V, the sensor power supply voltage decreases for 0.5 seconds or more. | No. 2 skid control ECU (brake actuator assembly) | Brake/EPB | A | Output ECU: No. 2 skid control ECU (brake actuator assembly) |
After replacing the No. 2 skid control ECU (brake actuator assembly), perform "Calibration".
Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM>UTILITY
for LHD: Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>BRAKE ACTUATOR (for LHD)>REMOVAL
for RHD: Click hereBrake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>BRAKE ACTUATOR (for RHD)>REMOVAL
| Proceed to |
|---|
| NEXT |
NEXT