If the air outlet does not change even after the mode switch display changing, the following causes are possible.
| Symptom | Factor |
|---|---|
| Air vent cannot be changed
(Display changes) |
·
MODE servo motors malfunction ·
Damper and link operation (jamming) ·
Air conditioning radiator assembly malfunction |
| Result | Proceed to |
|---|---|
| for Driver Seat Side | A |
| for Front Passenger Seat Side | B |
| for Rear Seat Side | C |
A
B
C
Check for No. 1 air conditioning radiator damper servo sub-assembly is installed correctly.
No. 1 air conditioning radiator damper servo sub-assembly is installed correctly.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Check for DTCs.
DTC B1443 and B1455 are not output.
| Result | Proceed to |
|---|---|
| DTCs are not output | A |
| DTC B1443 is output | B |
| DTC B1455 is output | C |
A
B
C
Check for No. 6 air conditioning radiator damper servo sub-assembly is installed correctly.
No. 6 air conditioning radiator damper servo sub-assembly is installed correctly.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Check for DTCs.
DTC B1448 and B1456 are not output.
| Result | Proceed to |
|---|---|
| DTCs are not output | A |
| DTC B1448 is output | B |
| DTC B1456 is output | C |
A
B
C
Check for No. 5 air conditioning radiator damper servo sub-assembly is installed correctly.
No. 5 air conditioning radiator damper servo sub-assembly is installed correctly.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Check for DTCs.
DTC B1486 is not output.
| Result | Proceed to |
|---|---|
| DTCs are not output | A |
| DTC B1486 is output | B |
A
B