Home › Engine / Hybrid System › FC CONTROL › FC CONTROL SYSTEM › 2020.11–2021.08
RM37H0E _51 Engine / Hybrid System _095966 FC CONTROL _0466766 FC CONTROL SYSTEM C

FC CONTROL  FC CONTROL SYSTEM  P1F651C  FC Converter Control Module Power Supply (-5V) Circuit Voltage Out of Range  P1F661C  FC Converter Control Module Power Supply (+V5AREF) Circuit Voltage Out of Range  


DESCRIPTION

The FC boost control ECU is located inside the FC converter assembly. It monitors its internal operation and will store these DTCs when it detects an ECU internal malfunction.

DTC No. Detection Item DTC Detection Condition Trouble Area Warning Indicate DTC Output from Priority
P1F651C FC Converter Control Module Power Supply (-5V) Circuit Voltage Out of Range Internal malfunction of FC boost control ECU which is located inside FC converter (-5 V power source malfunction inside ECU) is detected.
(1 trip detection logic)
·

FC boost control ECU

·

ECU power source circuit


Master Warning: Comes on FCDC A
P1F661C FC Converter Control Module Power Supply (+V5AREF) Circuit Voltage Out of Range Internal malfunction of FC boost control ECU which is located inside FC converter (power source IC malfunction inside ECU) is detected.
(1 trip detection logic)
·

FC boost control ECU

·

ECU power source circuit


Master Warning: Comes on FCDC A

Related Data List
DTC No. Data List
P1F651C Power Supply Monitor Voltage (-5V)
P1F661C Power Supply Monitor Voltage (+B)

WIRING DIAGRAM

A478991E04
1.729,0.333 1.885,0.531 0.156,0.198 10 false 5 1.719,0.729 1.906,0.938 0.188,0.208 10 false 2 2.104,1.167 2.76,1.354 0.656,0.188 10 false IG2 3.625,0.615 4.375,0.813 0.75,0.198 10 false FCDC-IG2 2.563,0.323 2.719,0.521 0.156,0.198 10 false 3 2.563,0.75 2.719,0.948 0.156,0.198 10 false 1 4.708,0.333 4.865,0.531 0.156,0.198 10 false 6 4.948,0.479 5.26,0.656 0.313,0.177 10 false IG2 0.406,1.354 1.052,1.552 0.646,0.198 11 false R/R FR 2.594,1.896 2.938,2.063 0.344,0.167 10 false IG1D 3.01,1.75 3.375,1.979 0.365,0.229 10 false 17 0.885,2.313 1.208,2.49 0.323,0.177 10 false D86 0.875,2.479 3.833,2.74 2.958,0.26 10 false Certification ECU (Smart Key ECU Assembly) 0.833,3.156 1.75,3.375 0.917,0.219 10 false IGCT NO. 1 0.635,3.573 1.333,3.76 0.698,0.188 10 false R/R RB# 2 1.865,3.688 2.875,3.917 1.01,0.229 10 false IGCT NO. 1 3.052,3.167 3.813,3.344 0.76,0.177 10 false IGCT NO. 7 0.594,4.615 1.208,5.063 0.615,0.448 10 false Auxiliary Battery 2.521,4.417 2.969,4.615 0.448,0.198 10 false MREL 3.021,4.292 3.229,4.49 0.208,0.198 10 false 21 1.656,4.844 2.042,5.021 0.385,0.177 10 false A8*1 1.656,5.01 3.5,5.333 1.844,0.323 10 false EV Control ECU 4.667,2.427 4.979,2.604 0.313,0.177 10 false 12 4.677,2.896 5.021,3.125 0.344,0.229 10 false 13 4.958,4.167 5.281,4.344 0.323,0.177 10 false B6 4.677,3.771 4.99,3.969 0.313,0.198 10 false 11 4.948,3.042 5.271,3.219 0.323,0.177 10 false +B2 4.958,2.583 5.281,2.76 0.323,0.177 10 false +B1 4.969,3.458 5.292,3.635 0.323,0.177 10 false E1 4.979,4.333 6.667,4.656 1.688,0.323 10 false FC Boost Control ECU 5.188,5.188 6.813,5.438 1.625,0.25 10 false FC Converter Assembly 2.573,2.875 2.76,3.083 0.188,0.208 10 false 5 1.708,2.885 1.896,3.094 0.188,0.208 10 false 3 2.563,3.281 2.75,3.49 0.188,0.208 10 false 2 1.708,3.26 1.896,3.469 0.188,0.208 10 false 1 4.969,3.885 5.292,4.063 0.323,0.177 10 false E2 4.677,3.313 5.01,3.521 0.333,0.208 10 false 10 0.802,0.615 1.656,0.802 0.854,0.188 10 false R/R-B NO. 1 2.063,4.844 2.51,5.01 0.448,0.167 10 false D15*2 3.427,4.969 4.458,5.167 1.031,0.198 10 false *1: for LHD 3.427,5.333 4.458,5.531 1.031,0.198 10 false *2: for RHD

CAUTION / NOTICE / HINT

CAUTION:
·
A340358

A484004

Before the following operations are conducted, take precautions to prevent electric shock by turning the ignition switch off, wearing insulated gloves, and removing the EV supply battery assembly service plug grip and FC converter power outlet cable (inverter with converter assembly) on FC converter side.

Make sure to remove the EV supply battery assembly service plug grip first.

-

Inspecting the high-voltage system

-

Disconnecting the low voltage connector of the inverter with converter assembly

-

Disconnecting the low voltage connector of the EV supply battery assembly

-

Disconnecting the low voltage connector of the FC converter assembly


·
A341450

After removing the service plug grip from the EV supply battery assembly, put it in your pocket to prevent other technicians from accidentally reconnecting it while you are working on the high-voltage system. After removing the FC converter power outlet cable (inverter with converter assembly) on FC converter side and use the "HIGH-VOLTAGE, DO NOT TOUCH" sign to notify other technicians that you are working on the high-voltage system.

·
A484005

After removal of the EV supply battery assembly service plug grip and FC converter power outlet cable (inverter with converter assembly) on FC converter side, wait for at least 10 minutes before touching the high-voltage connectors and terminals. After waiting for 10 minutes, check the voltage at the terminals in the inspection point in the inverter with converter assembly. The voltage should be 0 V before beginning work.

HINT:

At least 10 minutes are necessary to discharge the high-voltage capacitors inside the inverter with converter assembly and FC stack assembly.


·
A484932

Since high voltage accumulates within the FC stack assembly with FC converter, never perform the work of separating the FC stack assembly with FC converter into the FC converter assembly and FC stack assembly without first performing electrical charge discharge (forced electrical charge discharge or electrical charge self-discharge), because doing so is dangerous.

Click hereEngine / Hybrid System>FC CONTROL>FC STACK>REMOVAL

·

Removing and installing the FC stack assembly without first discharging the electrical charge may result in an electric shock due to the high voltage circuit.



NOTICE:
·

When reinstalling the service plug grip to the EV supply battery assembly, after lowering the EV supply battery assembly service plug grip 90°, securely slide it until a "click" sound is heard.

Click hereEngine / Hybrid System>FC CONTROL>FC CONTROL SYSTEM>PRECAUTION

·

This vehicle performs FC system shutdown process after turning the ignition switch off from ON (READY). Therefore, after the ignition switch is turned off from ON (READY), do not perform any work on the electrical system for at least 10 minutes including removing connectors or disconnecting the negative (-) auxiliary battery terminal.

·

When the EV control ECU determines that the temperature of FC system components is below 0°C (32°F) when the vehicle is parked with the ignition switch off, it operates the FC air compressor, hydrogen pump and FC cooling water pump for a maximum of 180 seconds to drain the FC stack assembly. When performing inspection or repairs with the ignition switch off (not ON or ON (READY)), disconnect the cable from the negative (-) auxiliary battery terminal before performing work. (If the auxiliary battery voltage is needed to conduct inspection, perform the inspection in an environment with an ambient temperature of 10°C (50°F) or higher.)

·

Inspect the fuses for circuits related to this system before performing the following procedure.



HINT:

After the repair, clear the DTCs and perform the following procedure to check that DTCs are not output.

Turn the ignition switch to ON (READY) and wait for 5 seconds or more.



PROCEDURE

1.CHECK ECU POWER SOURCE CIRCUIT
a.

Check for ECU power source circuit.

HINT:
·

DTC P1F651C or P1F661C may be stored due to a malfunction in the power source circuit (+B1, +B2 terminal) of the FC boost control ECU.

·

If there is a malfunction in the ECU power source circuit, do not proceed with the REPLACE FC CONVERTER ASSEMBLY procedure.




Result:
Proceed to
NEXT



NEXT

2.REPLACE FC CONVERTER AND FC STACK ASSEMBLY COMPONENT PARTS
2.REPLACE FC CONVERTER AND FC STACK ASSEMBLY COMPONENT PARTS

Replace the FC converter and FC stack assembly components listed below.

HINT:

Click hereEngine / Hybrid System>FC CONTROL>CONVERTER ASSEMBLY>REMOVAL


·

FC boost control ECU


HINT:
·

Refer to the parts location for the FC converter and FC stack assembly components.

Click hereEngine / Hybrid System>FC CONTROL>FC CONTROL SYSTEM>PARTS LOCATION

·

Refer to the system description for the parts location of the FC converter and FC stack assembly components.

Click hereEngine / Hybrid System>FC CONTROL>FC CONTROL SYSTEM>SYSTEM DESCRIPTION



Result:
Proceed to
NEXT



NEXT

END