| *1 | REAR SEAT OUTER BELT ASSEMBLY LH (FLOOR ANCHOR) | *2 | REAR SEAT OUTER BELT ASSEMBLY RH (FLOOR ANCHOR) |
| *3 | REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH (FLOOR ANCHOR) | - | - |
| ● | Non-reusable part | - | - |
| ● | Non-reusable part | - | - |
| Procedure | Part Name Code |
|
|
|
|
|---|---|---|---|---|---|
| 18 | PACKAGE TRAY TRIM PANEL ASSEMBLY | 64330 | ( )
|
- | - |
| 19 | REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH | 73470B | - | - | - |
| *A | w/o Rear Sunshade | *B | w/ Rear Sunshade |
Move both front seats to the frontmost position and fold them forward.
72693
2.REMOVE REAR SEAT CUSHION LOCK HOOK
71398A
4.REMOVE REAR SEATBACK HOLDER
73480A
5.REMOVE REAR SEAT INNER BELT ASSEMBLY LH
|
Bolt |
|
Connector |
67918F
6.REMOVE REAR DOOR SCUFF PLATE INSIDE LH
67917F
7.REMOVE REAR DOOR SCUFF PLATE INSIDE RH
Use the same procedure described for the LH side.
62332A
8.REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP LH
|
|
Click hereVehicle Exterior>DOOR / HATCH>REAR DOOR OPENING TRIM WEATHERSTRIP>REMOVAL
62331A
9.REMOVE REAR DOOR OPENING TRIM WEATHERSTRIP RH
Use the same procedure described for the LH side.
62552F
10.REMOVE REAR SEAT SIDE GARNISH LH
62551F
11.REMOVE REAR SEAT SIDE GARNISH RH
Use the same procedure described for the LH side.
62488A
12.REMOVE INNER ROOF SIDE GARNISH COVER LH
62487A
13.REMOVE INNER ROOF SIDE GARNISH COVER RH
Use the same procedure described for the LH side.
62480A
14.REMOVE INNER ROOF SIDE GARNISH ASSEMBLY LH
62470A
15.REMOVE INNER ROOF SIDE GARNISH ASSEMBLY RH
Use the same procedure described for the LH side.
62440
16.REMOVE ROOF SIDE RAIL GARNISH ASSEMBLY LH
62430
17.REMOVE ROOF SIDE RAIL GARNISH ASSEMBLY RH
Use the same procedure described for the LH side.
64330
18.REMOVE PACKAGE TRAY TRIM PANEL ASSEMBLY
w/o Rear Sunshade:
| *a | Shoulder Cover | - | - |
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Using moulding remover A, detach the claw.
Pull in the removal direction (1) shown in the illustration to detach the guide and remove the shoulder cover of rear seat inner with center belt assembly RH from the package tray trim panel assembly.
Detach the clip.
Pull in the removal direction (2) shown in the illustration to detach the guide and remove the package tray trim panel assembly.
w/ Rear Sunshade:
| *a | Shoulder Cover | - | - |
|
Remove in this Direction (1) |
|
Remove in this Direction (2) |
Using moulding remover A, detach the claw.
Pull in the removal direction (1) shown in the illustration to detach the guide and remove the shoulder cover of rear seat inner with center belt assembly RH from the package tray trim panel assembly.
Detach the clip.
Pull in the removal direction (2) shown in the illustration to detach the guide and remove the package tray trim panel assembly.
73470B
19.REMOVE REAR SEAT INNER WITH CENTER BELT ASSEMBLY RH
|
Bolt A |
|
Bolt B |