Home › BODY ELECTRICAL › PARK ASSIST / MONITORING › REAR VIEW MONITOR SYSTEM

REAR VIEW MONITOR SYSTEM > PROBLEM SYMPTOMS TABLE

for Preparation Click here


HINT:
Use the table below to help determine the cause of the problem symptom. The potential causes of the symptoms are listed in order of probability in the "Suspected area" column of the table. Check each symptom by checking the suspected areas in the order they are listed. Replace parts as necessary.


 
Symptom
Suspected area
See page
When shift lever is in R position, rear view monitor image is not displayed (Screen is not black).
1. Reverse signal circuit
Click here
2. Proceed to "Display Signal Circuit between Multi-display and Television Camera Assembly"
Click here
3. Multi-display
-
When shift lever is in R position, rear view monitor image is not displayed (Screen is black).
1. Multi-display power source circuit
Click here
2. Proceed to "Display Signal Circuit between Multi-display and Television Camera Assembly"
Click here
3. Multi-display
-
4. Television camera assembly
-
When shift lever is not in R position, rear view monitor image is displayed.
1. Reverse signal circuit
Click here
2. Multi-display
-
Problem with the rear view monitor image (color, disorder of picture).
1. Proceed to "Display Signal Circuit between Multi-display and Television Camera Assembly"
Click here
2. Multi-display
-
3. Television camera assembly
-