Home › Engine / Hybrid System › HYBRID / BATTERY CONTROL › HV RELAY ASSEMBLY › 2011.12–2014.12
RM2170E _51 Engine / Hybrid System _057004 HYBRID / BATTERY CONTROL _0277934 HV RELAY ASSEMBLY A

HYBRID / BATTERY CONTROL  HV RELAY ASSEMBLY  REMOVAL  


PROCEDURE

Hide 71033 4.REMOVE REAR SEAT CUSHION LEG SUB-ASSEMBLY

Hide G92F1 11.REMOVE NO. 1 HYBRID BATTERY EXHAUST DUCT

Hide G92N1A 12.REMOVE NO. 1 HYBRID VEHICLE BATTERY COVER PANEL LH

CAUTION:

Wear insulated gloves.


a.
A266761E02
3.01,1.854 3.177,1.854 false 2.833,2.5 3.104,2.5 false 2.635,2.875 2.479,2.875 false 2.875,2.823 2.99,2.708 2.99,2.708 3.063,2.708 false 3.188,1.771 3.375,1.969 0.188,0.198 10 false *1 3.135,2.406 3.323,2.604 0.188,0.198 10 false *a 2.302,2.781 2.49,2.979 0.188,0.198 10 false *2 2.198,2.49 2.385,2.688 0.188,0.198 10 false *b 3.083,2.625 3.271,2.823 0.188,0.198 10 false *3

Using the service plug grip, remove the battery cover lock striker.

Text in Illustration
*1 Service Plug Grip
*2 Battery Cover Lock Striker
*3 Button
*a Projection
*b Turn

HINT:

Insert the projection part of the service plug grip, and turn the button of the battery cover lock striker counterclockwise, and release the lock.



b.

Remove the 4 nuts and No. 1 hybrid vehicle battery cover panel LH.


Hide 82164 13.DISCONNECT FRAME WIRE

CAUTION:

Wear insulated gloves.


NOTICE:

Insulate the disconnected connectors with insulating tape.


a.
A266764E03
2.271,0.906 1.958,1.156 true 1.792,1.104 1.938,1.302 0.146,0.198 10 true *1

Disconnect the 2 connectors shown in the illustration.

Text in Illustration
*1 Shielded Wire Ground


b.

Disconnect the shielded wire ground and frame wire.


Hide G920R 14.REMOVE NO. 2 HYBRID BATTERY SHIELD SUB-ASSEMBLY

CAUTION:

Wear insulated gloves.


a.
A266763

Disconnect the connector.


b.
A266759

Disconnect the connector and clamp.


c.
A266758

Disconnect the 2 connectors and 3 clamps.


d.
A266766

Remove the 2 bolts and 2 nuts.


e.
A267092E04
0.25,0.688 0.5,0.896 0.25,0.208 10 true *a

Move the HV battery toward the front of the vehicle.

Text in Illustration
*a Front of Vehicle

HINT:

Move the HV battery to a position where both the No. 2 hybrid battery shield sub-assembly and the hybrid battery junction block assembly can be removed.



f.
A266775

Remove the 2 bolts, nut and No. 2 hybrid battery shield sub-assembly.


Hide G92Z0 15.REMOVE HYBRID BATTERY JUNCTION BLOCK ASSEMBLY

CAUTION:

Wear insulated gloves.


NOTICE:

Insulate the disconnected terminals with insulating tape.


a.
A266777

Open the terminal cover.


b.
A266779

Using an insulated tool, remove the 2 bolts.


c.
A266776

Disconnect the connector.


d.
A255175

Remove the 3 bolts and hybrid battery junction block assembly.