Home › Engine / Hybrid System › 1NZ-FXE INTAKE / EXHAUST › INTAKE MANIFOLD
RM2170E _51 Engine / Hybrid System _057008 1NZ-FXE INTAKE / EXHAUST _0277968 INTAKE MANIFOLD A

1NZ-FXE INTAKE / EXHAUST  INTAKE MANIFOLD  REMOVAL  


PROCEDURE

Hide 22030 1.REMOVE THROTTLE BODY WITH MOTOR ASSEMBLY

Hide 89421 4.REMOVE MANIFOLD ABSOLUTE PRESSURE SENSOR

Hide 17138B 5.REMOVE INTAKE MANIFOLD STAY

a.
A268286

Remove the 2 bolts and intake manifold stay.


Hide 17111 6.REMOVE INTAKE MANIFOLD

a.
A267685

Disconnect the 4 wire harness clamps and water by-pass hose.


b.
A267684

Disconnect the fuel vapor feed hose and ventilation hose.


c.
A268526

Remove the 3 bolts, 2 nuts and intake manifold.


d.
A268531

Remove the ventilation hose.


e.
A268529

Remove the bolt and intake manifold insulator.


f.
A268530

Remove the No. 1 intake manifold to head gasket.