Home › Engine / Hybrid System › 1NZ-FXE (COOLING) › THERMOSTAT
RM2170E _51 Engine / Hybrid System _057009 1NZ-FXE COOLING _0277975 THERMOSTAT A

1NZ-FXE COOLING  THERMOSTAT  INSTALLATION  


PROCEDURE

Hide 16031 1.INSTALL WATER INLET WITH THERMOSTAT SUB-ASSEMBLY

a.

Install a new gasket on the water inlet with thermostat sub-assembly.


b.

Install the water inlet with thermostat sub-assembly with the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


c.

Connect the water inlet hose and No. 3 water by-pass hose.