1.DRAIN COOLANT (for Engine)
17705
2.REMOVE AIR CLEANER CAP SUB-ASSEMBLY
3.REMOVE AIR CLEANER CASE SUB-ASSEMBLY
16572D
4.DISCONNECT NO. 2 RADIATOR HOSE
16031
5.REMOVE WATER INLET WITH THERMOSTAT SUB-ASSEMBLY
Disconnect the water inlet hose and No. 3 water by-pass hose.
| *1 | Water Inlet Hose |
| *2 | No. 3 Water By-pass Hose |
Do not apply force to the water inlet with thermostat sub-assembly when disconnecting the No. 3 water by-pass hose.
Do not damage the water inlet with thermostat sub-assembly.
Remove the 2 bolts and water inlet with thermostat sub-assembly.
Remove the gasket from the water inlet with thermostat sub-assembly.