Use the same procedure for the No. 3 parking brake cable assembly and No. 2 parking brake cable assembly.
46420A
1.INSTALL NO. 1 PARKING BRAKE CABLE CLAMP
Engage the 2 claws to install a new No. 1 parking brake cable clamp to the No. 3 parking brake cable assembly.
46430
2.INSTALL NO. 3 PARKING BRAKE CABLE ASSEMBLY
Install the No. 3 parking brake cable assembly with the 4 bolts.
Engage clamp A to install the No. 3 parking brake cable assembly.
Securely install the clamp.
Insert the No. 2 parking brake cable assembly and No. 3 parking brake cable assembly into new clamp B and install clamp B to the vehicle.
Install the No. 3 parking brake cable assembly onto the backing plate with the bolt.
Connect the No. 3 parking brake cable assembly to the parking brake equalizer.
Engage the 2 claws to install the parking brake cable stopper.
77606
3.INSTALL NO. 1 FUEL TANK PROTECTOR SUB-ASSEMBLY (for RH Side)
Install the No. 1 fuel tank protector sub-assembly with the bolt.
Install the clip.
58156
4.INSTALL FRONT NO. 4 FLOOR HEAT INSULATOR (for RH Side)
Install the front No. 4 floor heat insulator with the 2 nuts.
46430
5.CONNECT NO. 3 PARKING BRAKE CABLE ASSEMBLY
(See page Brake>BRAKE (REAR)>REAR BRAKE>INSTALLATION)
6.ADJUST PARKING BRAKE LEVER TRAVEL
58997
7.INSTALL NO. 3 CONSOLE BOX MOUNTING BRACKET
58995A
8.INSTALL NO. 1 CONSOLE BOX MOUNTING BRACKET
9.INSTALL REAR CONSOLE BOX ASSEMBLY