1.INSTALL AUXILIARY BATTERY
Install the battery insulator.
Install the battery.
Connect the battery ventilation hose to the battery without kinking it.
Push in the battery ventilation hose to the battery until a click sound is heard.
Connect the positive (+) battery terminal with the nut.
Install the battery terminal cap.
Install the battery clamp with the 2 nuts.
2.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
Connect the negative battery terminal with the nut.
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).
58165F
3.INSTALL FRONT FLOOR COVER RH