Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › SMART ENTRY AND START SYSTEM (for Start Function) › 2011.12–2013.12
RM2170E _58 Vehicle Interior _057035 THEFT DETERRENT / KEYLESS ENTRY _0278081 SMART ENTRY AND START SYSTEM(for Start Function) S

THEFT DETERRENT / KEYLESS ENTRY  SMART ENTRY AND START SYSTEM(for Start Function)  DIAGNOSTIC TROUBLE CODE CHART  


Smart Entry and Start System (for Start Function)
DTC Code Detection Item DTC Output Confirmation Operation See page
B2271 Ignition Hold Monitor Malfunction IG ON (Click here)
B2274 ACC Monitor Malfunction Wait 10 seconds after turning the power switch on (ACC) or on (IG), and then wait another 10 seconds after turning the power switch off. (Click here)
B2275 STSW Monitor Malfunction Turn the power switch on (IG) and wait 10 seconds or more, then start the hybrid control system 3 times. (Click here)
B2277 Detecting Vehicle Submersion Wait 300 seconds after connecting the cable to the negative (-) auxiliary battery terminal. (Click here)
B2282 Vehicle Speed Signal Malfunction Drive the vehicle for 20 seconds at a vehicle speed of 25 km/h (16 mph) or more, and then drive the vehicle at a vehicle speed of less than 5 km/h (3 mph) for 20 seconds. (Click here)
B2283 Vehicle Speed Sensor Malfunction Drive the vehicle for 30 seconds or more at a vehicle speed of 50 km/h (31 mph) or more. (Click here)
B2284 Brake Signal Malfunction Connect the cable to the negative (-) auxiliary battery terminal, release the brake pedal and wait 20 seconds or more. Then depress the brake pedal for 20 seconds or more. (Click here)
B2285 Steering Lock Position Signal Circuit Malfunction Disconnect the cable from the negative (-) auxiliary battery terminal, wait 30 seconds and then reconnect the cable to the negative (-) auxiliary battery terminal. Wait 40 seconds or more with the power switch off (with the steering wheel locked), then turn the power switch on (ACC) (with the steering unlocked) and wait 40 seconds or more. (Click here)
B2286 Runnable Signal Malfunction Turn the power switch on (IG) and wait 20 seconds or more. (Click here)
U0100 Lost Communication with ECM Turn the power switch on (IG) and wait 10 seconds or more. (Click here)
U0140 Lost Communication with Main Body ECU Always (Click here)
U0142 Lost Communication with Main Body ECU Always (Click here)
U0155 Lost Communication with Combination Meter Turn the power switch on (IG) and wait 10 seconds or more. (Click here)
U0293 Lost Communication with HV ECU Turn the power switch on (IG) and wait 10 seconds or more. (Click here)
U0293 Lost Communication with HV ECU Turn the power switch on (IG) and wait 10 seconds or more. (Click here)