Home › Vehicle Interior › SEAT BELT › REAR CENTER SEAT OUTER BELT ASSEMBLY › 2011.12–2014.12
RM2170E _58 Vehicle Interior _057041 SEAT BELT _0278123 REAR CENTER SEAT OUTER BELT ASSEMBLY A

SEAT BELT  REAR CENTER SEAT OUTER BELT ASSEMBLY  INSTALLATION  


PROCEDURE

Hide 73350 1.INSPECT REAR CENTER SEAT LAP TYPE BELT ASSEMBLY

Hide 73350 2.INSTALL REAR CENTER SEAT LAP TYPE BELT ASSEMBLY

a.

Engage the 2 guides and temporarily install the rear center seat lap type belt assembly with the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


b.
B297191

Turn the rear center seat lap type belt assembly clockwise approximately 90° to install the guide.


c.

Install the bolt.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)


Hide 62471A 3.INSTALL ROOF SIDE INNER GARNISH RH

Hide 73350 4.CONNECT REAR CENTER SEAT LAP TYPE BELT ASSEMBLY

a.

Install the shoulder anchor of the rear center seat lap type belt assembly with the bolt.

Torque:
42 N*m (428 kgf*cm, 30 ft.*lbf)


b.
B300538

Engage the 2 claws to close the cover as shown in the illustration.


Hide 64730B 5.INSTALL DECK TRIM SIDE PANEL ASSEMBLY RH

HINT:

Use the same procedure as for the LH side (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION).


Hide 58731C 6.INSTALL REAR ABSORBER CAP RH

HINT:

Use the same procedure as for the LH side (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION).


Hide 73360 7.CONNECT REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY RH

HINT:

Use the same procedure as for the LH side (See page Vehicle Interior>SEAT BELT>REAR SEAT OUTER BELT ASSEMBLY>INSTALLATION).


Hide 64330D 9.INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY

Hide 62331A 13.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP RH

Hide 67917A 14.INSTALL REAR DOOR SCUFF PLATE RH

HINT:

Use the same procedure as for the LH side (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION).


Hide 71960B 20.INSTALL REAR CENTER SEAT HEADREST ASSEMBLY

Hide 71940A 21.INSTALL REAR SEAT HEADREST ASSEMBLY