Home › Vehicle Interior › HEATING / AIR CONDITIONING › COMPRESSOR › 2011.12–2014.12
RM2170E _58 Vehicle Interior _057042 HEATING / AIR CONDITIONING _0278132 COMPRESSOR A

HEATING / AIR CONDITIONING  COMPRESSOR  REMOVAL  


PROCEDURE

Hide 1.RECOVER REFRIGERANT FROM AIR CONDITIONING SYSTEM

Hide 51441C 4.REMOVE ENGINE UNDER COVER RH

Hide 88711 5.DISCONNECT NO. 1 COOLER REFRIGERANT DISCHARGE HOSE

a.
E234973

Remove the bolt and disconnect the No. 1 cooler refrigerant discharge hose from the compressor with motor assembly.


b.

Remove the O-ring from the No. 1 cooler refrigerant discharge hose.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.



Hide 88704 6.DISCONNECT SUCTION HOSE SUB-ASSEMBLY

a.
E234974

Remove the bolt and disconnect the suction hose sub-assembly from the compressor with motor assembly.


b.

Remove the O-ring from the suction hose sub-assembly.

NOTICE:

Seal the openings of the disconnected parts using vinyl tape to prevent entry of moisture and foreign matter.



Hide 88370 7.REMOVE COMPRESSOR WITH MOTOR ASSEMBLY

a.
E234971E03
1.365,0.531 1.615,0.26 false 1.677,0.167 1.885,0.375 0.208,0.208 10 false *1 2.625,2.708 3.042,2.917 0.417,0.208 10 false <A> 0.958,1.667 1.375,1.875 0.417,0.208 10 false <B>

Using a screwdriver, slide the green-colored lock of the connector <A> in the direction indicated by the arrow in the illustration to release it and disconnect the connector.

Text in Illustration
*1 Green-colored Lock

CAUTION:

Make sure to wear insulating gloves.


NOTICE:

Insulate the removed terminals and connector with insulating tape.



b.

Disconnect the connector <B>.


c.
E234975

Remove the 3 bolts and the compressor with motor assembly.