Home › Vehicle Exterior › DOOR / HATCH › FUEL LID LOCK CONTROL CABLE ASSEMBLY(for LHD) › 2013.12–2014.12
RM2170E _59 Vehicle Exterior _057046 DOOR / HATCH _0278164 FUEL LID LOCK CONTROL CABLE ASSEMBLY(for LHD) A

DOOR / HATCH  FUEL LID LOCK CONTROL CABLE ASSEMBLY(for LHD)  INSTALLATION  


PROCEDURE

Hide 77035 1.INSTALL FUEL LID LOCK CONTROL CABLE SUB-ASSEMBLY

a.

Engage the clamp of fuel lid lock control cable sub-assembly.


b.

Engage the fuel lid lock control cable sub-assembly to clamps.


c.
B297021

Engage the 2 claws to install the fuel lid lock control cable sub-assembly.


Hide 77306 2.INSTALL FUEL LID LOCK OPEN LEVER SUB-ASSEMBLY

a.

Connect the fuel lid lock control cable.


b.
B307905

Engage the guide.


c.

Install the fuel lid lock open lever sub-assembly with the screw.

Torque:
5.5 N*m (56 kgf*cm, 49 in.*lbf)


Hide 64740C 3.INSTALL DECK TRIM SIDE PANEL ASSEMBLY LH

Hide 81330 4.INSTALL NO. 1 LUGGAGE COMPARTMENT LIGHT ASSEMBLY

Hide 73370 6.INSTALL REAR SEAT 3 POINT TYPE OUTER BELT ASSEMBLY LH

Hide 64330D 11.INSTALL PACKAGE TRAY TRIM PANEL ASSEMBLY

Hide 62414A 12.INSTALL CENTER PILLAR LOWER GARNISH LH

Hide 62332A 13.INSTALL REAR DOOR OPENING TRIM WEATHERSTRIP LH

Hide 62312B 15.INSTALL FRONT DOOR OPENING TRIM WEATHERSTRIP LH

Hide 71960B 23.INSTALL REAR CENTER SEAT HEADREST ASSEMBLY

Hide 71940A 24.INSTALL REAR SEAT HEADREST ASSEMBLY