Home › Vehicle Interior › SEAT BELT › SEAT BELT WARNING SYSTEM (w/ Occupant Classification System) › from 2017.06
RM2170E _58 Vehicle Interior _057041 SEAT BELT _0320196 SEAT BELT WARNING SYSTEM(w/ Occupant Classification System) Y

SEAT BELT  SEAT BELT WARNING SYSTEM(w/ Occupant Classification System)  HOW TO PROCEED WITH TROUBLESHOOTING  


CAUTION / NOTICE / HINT

HINT:
·

Use this procedure to troubleshoot the seat belt warning system.

·

*: Use the GTS.



PROCEDURE

1.VEHICLE BROUGHT TO WORKSHOP
Result:
Proceed to
NEXT



NEXT

2.CUSTOMER PROBLEM ANALYSIS
2.CUSTOMER PROBLEM ANALYSIS

Result:
Proceed to
NEXT



NEXT

3.INSPECT AUXILIARY BATTERY VOLTAGE
3.INSPECT AUXILIARY BATTERY VOLTAGE
a.

Measure the auxiliary battery voltage with power switch off.

Standard Voltage:

11 to 14 V


If the voltage is below 11 V, recharge or replace the auxiliary battery before proceeding to the next step.


Result:
Proceed to
NEXT



NEXT

4.CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
4.CHECK COMMUNICATION FUNCTION OF CAN COMMUNICATION SYSTEM*
a.

Using the GTS, inspect the CAN communication function to ensure that there are no malfunctions in the communication system (See page Power Source / Network>NETWORKING>CAN COMMUNICATION SYSTEM>DIAGNOSIS SYSTEM).


Result:
Result Proceed to
DTC is not output A
DTC is output B



A

5.CHECK DTC OUTPUT (AIRBAG SYSTEM)*

B

5.CHECK DTC OUTPUT (AIRBAG SYSTEM)*


Result:
Result Proceed to
DTC is not output A
DTC is output B



A

6.CHECK DTC OUTPUT (OCCUPANT CLASSIFICATION SYSTEM)*

B

6.CHECK DTC OUTPUT (OCCUPANT CLASSIFICATION SYSTEM)*

A

7.CHECK COMBINATION METER SUB-ASSEMBLY

B

7.CHECK COMBINATION METER SUB-ASSEMBLY
a.

Check that the operation of the speedometer, shift indicator and brake warning light on the combination meter assembly.

OK:

The speedometer, shift indicator and brake warning light on the combination meter assembly operate normally.



Result:
Proceed to
OK
NG



OK

8.PROBLEM SYMPTOMS TABLE

NG

8.PROBLEM SYMPTOMS TABLE

Result:
Result Proceed to
Fault is not listed in problem symptoms table A
Fault is listed in problem symptoms table B



A

9.OVERALL ANALYSIS AND TROUBLESHOOTING*

B

10.REPAIR OR REPLACE
10.REPAIR OR REPLACE
Result:
Proceed to
NEXT



NEXT

11.CONFIRMATION TEST
11.CONFIRMATION TEST
Result:
Proceed to
NEXT



NEXT

END