Home › Engine / Hybrid System › 1NZ-FXE FUEL › FUEL PRESSURE REGULATOR(w/ Canister Pump Module) › from 2017.06
RM2170E _51 Engine / Hybrid System _057006 1NZ-FXE FUEL _0320552 FUEL PRESSURE REGULATOR(w/ Canister Pump Module) A

1NZ-FXE FUEL  FUEL PRESSURE REGULATOR(w/ Canister Pump Module)  REMOVAL  


PROCEDURE

Hide 77020A 1.REMOVE FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY

Hide 23220A 3.REMOVE FUEL PUMP WITH FILTER ASSEMBLY

Hide 23280J 4.REMOVE FUEL PRESSURE REGULATOR ASSEMBLY

a.
A359469C02
2.813,1.115 2.969,1.344 2.969,1.344 3.094,1.344 false 3.135,1.26 3.406,1.458 0.271,0.198 10 false *a
*a Protective Tape


Using a screwdriver with its tip wrapped with protective tape, remove the fuel pressure regulator assembly from the fuel filter.

NOTICE:
·

Pull out the fuel pressure regulator assembly carefully because the O-rings are firmly installed between the fuel pressure regulator assembly and fuel filter.

·

Do not damage the fuel filter.




b.
A148186C12
1.583,0.646 1.583,0.427 1.583,0.427 0.625,0.427 false 0.927,1.396 0.927,0.427 false 0.427,0.344 0.604,0.479 0.177,0.135 10 *1
*1 O-ring


Remove the 2 O-rings from the fuel pressure regulator assembly.