Home › Suspension › FRONT SUSPENSION › FRONT SHOCK ABSORBER › from 2017.06
RM2170E _53 Suspension _057017 FRONT SUSPENSION _0278007 FRONT SHOCK ABSORBER A

FRONT SUSPENSION  FRONT SHOCK ABSORBER  REMOVAL  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The procedure listed below is for the LH side.



PROCEDURE

Hide 1.REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

Hide 55722C 2.REMOVE INNER COWL TOP TO COWL BRACE (for LHD)

Hide 55722C 3.REMOVE INNER COWL TOP TO COWL BRACE (for RHD)

Hide 55735B 4.REMOVE FRONT AIR SHUTTER SEAL (for LHD)

Hide 55735B 5.REMOVE FRONT AIR SHUTTER SEAL (for RHD)

Hide 55815E 6.REMOVE FRONT NO. 1 VENTILATOR SEAL (for LHD)

Hide 55815E 7.REMOVE FRONT NO. 1 VENTILATOR SEAL (for RHD)

Hide 55701J 8.REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY (for LHD)

Hide 55701J 9.REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY (for RHD)

Hide 10.REMOVE FRONT WHEEL

Hide 48810 11.SEPARATE FRONT STABILIZER LINK ASSEMBLY

a.
C249870

Remove the nut and separate the front stabilizer link assembly from the front shock absorber assembly.

HINT:

Use a hexagon socket wrench to hold the stud.



Hide 47313A 12.SEPARATE FRONT FLEXIBLE HOSE

a.
C107502

Remove the bolt and separate the front speed sensor and front flexible hose.


Hide 48684B 13.REMOVE FRONT SUSPENSION SUPPORT DUST COVER

a.

Remove the front suspension support dust cover.


Hide 14.REMOVE FRONT SHOCK ABSORBER WITH COIL SPRING

a.
C249897C07
2.031,1.594 2.531,1.594 false 2.313,1.979 2.698,1.823 2.698,1.823 2.781,1.823 false 2.563,1.51 2.719,1.667 0.156,0.156 10 false *a 2.813,1.74 2.969,1.896 0.156,0.156 10 false *b
*a Wooden Block
*b Jack


Support the front lower No. 1 suspension arm sub-assembly using a jack and wooden block.


b.
C249872

Remove the 2 nuts and 2 bolts, and separate the front shock absorber with coil spring from the steering knuckle.

NOTICE:

When removing the nuts, keep the bolts from rotating.



c.
C249865

Using a hexagon socket wrench, hold the front shock absorber rod and remove the nut.


d.

Remove the front No. 2 suspension support.


e.

Remove the front shock absorber with coil spring from the vehicle.


Hide 48609 15.REMOVE FRONT SUSPENSION SUPPORT SUB-ASSEMBLY

Hide 48609E 16.REMOVE FRONT SUPPORT TO FRONT SHOCK ABSORBER NUT

a.
C107505

Using a hexagon socket wrench, hold the front shock absorber rod and loosen the front support to front shock absorber nut.


b.
C107506E03
2.652,1.128 2.955,1.287 0.304,0.159 10 SST 2.619,1.211 2.387,1.236 false

Using SST, compress the front coil spring.

SST
09727-30021  (09727-00010, 09727-00021, 09727-00031)

NOTICE:

Do not use an impact wrench. It will damage SST.



c.

Remove the front support to front shock absorber nut.


Hide 48304 17.REMOVE FRONT NO. 1 SPRING BUMPER SUB-ASSEMBLY

a.

Remove the front No. 1 spring bumper sub-assembly from the front shock absorber assembly.


Hide 48157C 18.REMOVE FRONT UPPER COIL SPRING INSULATOR

a.
C358810C03
0.552,1.76 0.656,1.76 0.656,1.76 1.333,1.604 false 1.396,1.583 1.646,1.906 1.646,1.906 1.844,1.594 true 0.406,1.677 0.719,1.833 0.313,0.156 10 false *1 1.594,1.917 1.906,2.073 0.313,0.156 10 false *a
*1 Front Upper Coil Spring Insulator
*a Claw


Disengage the front upper coil spring insulator from the claws of the front shock absorber assembly.


b.

Remove the front upper coil spring insulator from the front shock absorber assembly.


Hide 48132 19.REMOVE FRONT COIL SPRING

Hide 20.REMOVE FRONT LOWER COIL SPRING INSULATOR

a.

Remove the front lower coil spring insulator from the front shock absorber assembly.


Hide 48520 21.REMOVE FRONT SHOCK ABSORBER ASSEMBLY