Home › Vehicle Exterior › EXTERIOR PANELS / TRIM › ROCKER PANEL MOULDING › from 2018.08
RM2170E _59 Vehicle Exterior _057051 EXTERIOR PANELS / TRIM _0278213 ROCKER PANEL MOULDING A

EXTERIOR PANELS / TRIM  ROCKER PANEL MOULDING  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 75852 1.INSTALL ROCKER PANEL MOULDING (w/o Wheel Opening Moulding)

a.

Install the rocker panel moulding with the 10 No. 2 side mudguard retainers.


Hide 76902 2.INSTALL SIDE MUDGUARD SUB-ASSEMBLY (w/ Wheel Opening Moulding)

a.

Engage the 9 clips to install the side mudguard sub-assembly.


b.

Install the 10 No. 2 side mudguard retainers.


c.

Install the screw.


Hide 75606B 3.INSTALL QUARTER OUTSIDE MOULDING SUB-ASSEMBLY (w/ Wheel Opening Moulding)

Hide 75602A 4.INSTALL FRONT FENDER MOULDING SUB-ASSEMBLY (w/ Wheel Opening Moulding)