Home › Drivetrain › P410 (HYBRID TRANSMISSION / TRANSAXLE) › MOTOR CABLE › from 2014.11
RM2070E _52 Drivetrain _061915 P410 HYBRID TRANSMISSION / TRANSAXLE _0301648 MOTOR CABLE A

P410 HYBRID TRANSMISSION / TRANSAXLE  MOTOR CABLE  INSTALLATION  


PROCEDURE

Hide G1148 1.INSTALL MOTOR CABLE

NOTICE:

Wear insulated gloves.


a.

Install the motor cable to the hybrid vehicle transaxle assembly with the 3 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)

NOTICE:

Keep the sealing surface of the motor cable and the connector terminal joint free of foreign matter.



b.

Engage the 2 claws to install a new terminal cap.

NOTICE:

When installing the terminal cap to the motor cable terminal block, keep the sealing surface free of foreign matter.



c.
C209809

Place the motor cable connector shell in position and install it with the 2 bolts.

Torque:
10 N*m (102 kgf*cm, 7 ft.*lbf)


d.

Connect the 3 clamps.


Hide 51441 19.INSTALL NO. 1 ENGINE UNDER COVER

Hide 53289A 20.INSTALL RADIATOR SUPPORT OPENING COVER