Home › Brake › BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS › ELECTRONICALLY CONTROLLED BRAKE SYSTEM › 2013.08–2014.11
RM2070E _54 Brake _061923 BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS _0301683 ELECTRONICALLY CONTROLLED BRAKE SYSTEM C

BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS  ELECTRONICALLY CONTROLLED BRAKE SYSTEM  C1211/25  SLA Linear Solenoid  C1212/26  SLR Linear Solenoid  C1225/31  SA1 Solenoid Circuit  C1226/32  SA2 Solenoid Circuit  C1227/33  SA3 Solenoid Circuit  C1228/34  STR Solenoid Circuit  C1352/21  FR Solenoid  C1353/23  RR Solenoid  C1356/22  FL Solenoid  C1357/24  RL Solenoid  


DESCRIPTION

Each solenoid adjusts pressure which affects each wheel cylinder according to signals from the skid control ECU and controls the vehicle.

The master cut solenoid is closed and blocks the regulator pressure from the electronically controlled brake system control pressure when the system is normal. The master cut solenoid is open and sends the master cylinder and regulator hydraulic pressure to the non-assisted brake wheel cylinders during the fail-safe due to a system malfunction.

HINT:

If the supply voltage decreases, a drop in current may cause a DTC to be stored.


DTC Code INF Code DTC Detection Condition Trouble Area
C1211/25 21 Excess current is applied for 0.05 seconds or more. Brake booster with master cylinder (Skid control ECU or brake actuator)
↑ 22 An open is detected for 0.05 seconds or more while the solenoid is OFF. ↑
↑ 23 An open is detected for 0.05 seconds or more while the solenoid is ON.
·

Supply voltage reduced

·

Brake booster with master cylinder (Skid control ECU or brake actuator)


↑ 24 A short to +B or voltage leaks is detected for 0.05 seconds. Brake booster with master cylinder (Skid control ECU or brake actuator)
C1212/26 31 Excess current is applied for 0.05 seconds or more. Brake booster with master cylinder (Skid control ECU or brake actuator)
↑ 32 An open is detected for 0.05 seconds or more while the solenoid is OFF. ↑
↑ 33 An open is detected for 0.05 seconds or more while the solenoid is ON.
·

Supply voltage reduced

·

Brake booster with master cylinder (Skid control ECU or brake actuator)


↑ 34 A short to +B or voltage leaks is detected for 0.05 seconds. Brake booster with master cylinder (Skid control ECU or brake actuator)
C1225/31 41 Excess current is applied for 0.05 seconds or more. Brake booster with master cylinder (Skid control ECU or brake actuator)
↑ 42 An open is detected for 0.05 seconds or more while the solenoid is OFF. ↑
↑ 43 An open is detected for 0.05 seconds or more while the solenoid is ON.
·

Supply voltage reduced

·

Brake booster with master cylinder (Skid control ECU or brake actuator)


↑ 44 A short to +B or voltage leaks are detected for 0.05 seconds. Brake booster with master cylinder (Skid control ECU or brake actuator)
C1226/32 51 Excess current is applied for 0.05 seconds or more. Brake booster with master cylinder (Skid control ECU or brake actuator)
↑ 52 An open is detected for 0.05 seconds or more while the solenoid is OFF. ↑
↑ 53 An open is detected for 0.05 seconds or more while the solenoid is ON.
·

Supply voltage reduced

·

Brake booster with master cylinder (Skid control ECU or brake actuator)


↑ 54 A short to +B or voltage leaks are detected for 0.05 seconds. Brake booster with master cylinder (Skid control ECU or brake actuator)
C1227/33 61 Excess current is applied for 0.05 seconds or more. Brake booster with master cylinder (Skid control ECU or brake actuator)
↑ 62 An open is detected for 0.05 seconds or more while the solenoid is OFF. ↑
↑ 63 An open is detected for 0.05 seconds or more while the solenoid is ON.
·

Supply voltage reduced

·

Brake booster with master cylinder (Skid control ECU or brake actuator)


↑ 64 A short to +B or voltage leaks are detected for 0.05 seconds. Brake booster with master cylinder (Skid control ECU or brake actuator)
C1228/34 71 Excess current is applied for 0.05 seconds or more. Brake booster with master cylinder (Skid control ECU or brake actuator)
↑ 72 An open is detected for 0.05 seconds or more while the solenoid is OFF. ↑
↑ 73 An open is detected for 0.05 seconds or more while the solenoid is ON.
·

Supply voltage reduced

·

Brake booster with master cylinder (Skid control ECU or brake actuator)


↑ 74 A short to +B or voltage leaks are detected for 0.05 seconds. Brake booster with master cylinder (Skid control ECU or brake actuator)
C1352/21 11
12
When the solenoid relay contact on, open or short in solenoid circuit continues for 0.05 seconds or more. Brake booster with master cylinder (Skid control ECU or brake actuator)
C1353/23 15
16
When the solenoid relay contact on, open or short in solenoid circuit continues for 0.05 seconds or more. Brake booster with master cylinder (Skid control ECU or brake actuator)
C1356/22 13
14
When the solenoid relay contact on, open or short in solenoid circuit continues for 0.05 seconds or more. Brake booster with master cylinder (Skid control ECU or brake actuator)
C1357/24 17
18
When the solenoid relay contact on, open or short in solenoid circuit continues for 0.05 seconds or more. Brake booster with master cylinder (Skid control ECU or brake actuator)

CAUTION / NOTICE / HINT

NOTICE:

When replacing the brake booster with master cylinder (skid control ECU or brake actuator), perform initialization and calibration of the linear solenoid valve (See page Brake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM>INITIALIZATION).


PROCEDURE

1.CHECK DTC

b.

Check if the same DTC is recorded (See page Brake>BRAKE CONTROL / DYNAMIC CONTROL SYSTEMS>ELECTRONICALLY CONTROLLED BRAKE SYSTEM>DTC CHECK / CLEAR).

HINT:

If a DTC for undervoltage is output, first troubleshoot the power source system.


Result:
Result Proceed to
DTCs (C1211/25, C1212/26, C1225/31, C1226/32, C1227/33, C1228/34, C1352/21, C1353/23, C1356/22 and C1357/24) are not output A
A DTC (C1241/41) for undervoltage is output B
DTCs (C1211/25, C1212/26, C1225/31, C1226/32, C1227/33, C1228/34, C1352/21, C1353/23, C1356/22 and/or C1357/24) are output (for LHD) C
DTCs (C1211/25, C1212/26, C1225/31, C1226/32, C1227/33, C1228/34, C1352/21, C1353/23, C1356/22 and/or C1357/24) are output (for RHD) D




A

B

C

REPLACE BRAKE BOOSTER WITH MASTER CYLINDER

D

REPLACE BRAKE BOOSTER WITH MASTER CYLINDER