Home › Vehicle Interior › PRE-CRASH SAFETY › SEAT BELT CONTROL ECU › 2012.03–2013.08
RM2070E _58 Vehicle Interior _061943 PRE-CRASH SAFETY _0301810 SEAT BELT CONTROL ECU A

PRE-CRASH SAFETY  SEAT BELT CONTROL ECU  INSTALLATION  


PROCEDURE

Hide 89815 1.INSTALL SEAT BELT CONTROL ECU

a.

for LHD:

i.
B283195

Engage the 2 claws to install the seat belt control ECU.



b.

for RHD:

i.
B266764

Engage the 2 claws to install the seat belt control ECU.



Hide 55550 4.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

Hide 55607 5.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

Hide 6.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL

NOTICE:

When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).