85535E
1.INSTALL NO. 2 POWER OUTLET SOCKET COVER
Engage the 2 claws to install the No. 2 power outlet socket cover.
85530E
2.INSTALL NO. 3 POWER OUTLET SOCKET ASSEMBLY (for LHD)
Engage the claw to install the No. 3 power outlet socket assembly as shown in the illustration.
85530E
3.INSTALL NO. 3 POWER OUTLET SOCKET ASSEMBLY (for RHD)
Engage the claw to install the No. 3 power outlet socket assembly as shown in the illustration.
4.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY
55440D
5.INSTALL INSTRUMENT PANEL BOX ASSEMBLY
6.INSTALL INTEGRATION CONTROL AND PANEL
58810J
7.INSTALL CONSOLE BOX ASSEMBLY
8.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).
64995
9.INSTALL DECK FLOOR BOX RH
64993
10.INSTALL REAR DECK FLOOR BOX
58411A
11.INSTALL NO. 1 DECK BOARD
58412A
12.INSTALL NO. 2 DECK BOARD
58410B
13.INSTALL DECK BOARD ASSEMBLY