Home › Vehicle Interior › INTERIOR PANELS / TRIM › LOWER INSTRUMENT PANEL › 2016.05–2020.08
RM2070E _58 Vehicle Interior _061948 INTERIOR PANELS / TRIM _0301858 LOWER INSTRUMENT PANEL A

INTERIOR PANELS / TRIM  LOWER INSTRUMENT PANEL  INSTALLATION  


PROCEDURE

Hide 55303B 1.INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for LHD)

a.

When using a new lower instrument panel sub-assembly:

i.

Immediately before installing the lower instrument panel sub-assembly, twist and cut off the portion shown in the illustration.

B283369



b.

Install the lower instrument panel sub-assembly with the 2 bolts <A>, 10 screws <C> and screw <D>.


c.

Engage the 2 claws.


d.

Engage the 2 claws to connect the room temperature sensor.


e.

Engage each clamp.


f.
E190807

Connect the connector and engage the claw as shown in the illustration.

NOTICE:

Be sure to engage the connector securely.



g.

Connect the connector.


Hide 55303B 2.INSTALL LOWER INSTRUMENT PANEL SUB-ASSEMBLY (for RHD)

a.

When using a new lower instrument panel sub-assembly:

i.

Immediately before installing the lower instrument panel sub-assembly, twist and cut off the portion shown in the illustration.

B313833



b.

Install the lower instrument panel sub-assembly with the 2 bolts <A>, 10 screws <C> and screw <D>.


c.

Engage the 2 claws to connect the DLC3.


d.

Engage the 2 claws to connect the room temperature sensor.


e.

Engage each clamp.


Hide 86101 3.INSTALL ANTENNA CORD SUB-ASSEMBLY (for LHD)

Hide 86101 4.INSTALL ANTENNA CORD SUB-ASSEMBLY (for RHD)

Hide 81260 5.INSTALL GLOVE BOX LIGHT ASSEMBLY

Hide 53601 6.CONNECT HOOD LOCK CONTROL LEVER SUB-ASSEMBLY

a.

Engage the claw and 2 guides to connect the hood lock control lever sub-assembly.


Hide 73900 7.INSTALL LOWER NO. 1 INSTRUMENT PANEL AIRBAG ASSEMBLY

Hide 55606 8.INSTALL NO. 1 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

a.

Connect each connector.


b.

Engage the clamp.


c.

Engage the guide and 2 claws.


d.

Install the No. 1 instrument panel under cover sub-assembly with the 2 screws <E>.


Hide 62112A 9.INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH

Hide 33560 11.INSTALL SHIFT LOCK CONTROL UNIT ASSEMBLY

Hide 55900 12.INSTALL AIR CONDITIONING CONTROL ASSEMBLY

Hide 13.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY

a.

Connect each connector.


b.

Engage the clamp.


c.
B283370

Engage the 11 claws to install the lower instrument finish panel sub-assembly.


Hide 14.INSTALL RADIO TUNER OPENING COVER WITH BRACKET (w/o Radio Receiver)

a.

Install the radio tuner opening cover with bracket with the 4 bolts <A>.


Hide 55405B 15.INSTALL CENTER INSTRUMENT CLUSTER FINISH PANEL SUB-ASSEMBLY (w/o Radio Receiver)

a.

Engage the 7 claws to install the center instrument cluster finish panel sub-assembly.


Hide 16.INSTALL RADIO AND DISPLAY RECEIVER ASSEMBLY WITH BRACKET (for Radio Receiver Type)

Hide 17.INSTALL NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (for Navigation Receiver Type)

Hide 18.INSTALL COMBINATION METER ASSEMBLY

a.

Connect each connector.


b.

Engage the clamp.


c.

Install the combination meter assembly with the 4 screws <E>.


Hide 58817A 20.INSTALL FRONT NO. 2 CONSOLE BOX INSERT

Hide 58804A 21.INSTALL UPPER CONSOLE PANEL SUB-ASSEMBLY

Hide 58534H 23.INSTALL CENTER FLOOR CARPET COVER LH

a.
B283382E03
1.583,1.344 1.833,1.552 0.25,0.208 10 true (1) 1.938,2.135 2.135,2.302 0.198,0.167 10 false (2)

Engage the guide and 4 claws to install the center floor carpet cover LH as shown in the illustration.


Hide 58533F 24.INSTALL CENTER FLOOR CARPET COVER RH

a.
B283383E03
1.74,1.344 1.938,1.51 0.198,0.167 10 false (1) 1.375,2.073 1.594,2.271 0.219,0.198 10 true (2)

Engage the guide and 4 claws to install the center floor carpet cover RH as shown in the illustration.


Hide 55054 25.INSTALL GLOVE COMPARTMENT DOOR STOPPER SUB-ASSEMBLY

a.

Engage the claw to install the glove compartment door stopper sub-assembly.


Hide 55550 26.INSTALL GLOVE COMPARTMENT DOOR ASSEMBLY

a.
B318018E03
1.896,0.344 2.052,0.49 0.156,0.146 10 false *b 1.021,1.885 1.177,2.031 0.156,0.146 10 false *a 0.813,0.823 1.063,1.125 0.25,0.302 10 false 65°

With the glove compartment door assembly opened approximately 65° from its closed position, engage the 2 hinges horizontally.

NOTICE:

Make sure to check that the hinge is engaged securely. If it is not, the glove compartment door assembly may not open/close properly and the lock portion may be damaged.


Text in Illustration
*a Opened Approximately 65°
*b Closed


b.
B283372E03
3.042,0.583 2.667,0.323 false 2.115,2.75 1.865,2.594 false 2.479,0.229 2.635,0.375 0.156,0.146 10 false *2 1.656,2.5 1.813,2.646 0.156,0.146 10 false *1 3.073,1.479 3.313,1.646 0.24,0.167 10 false (A) 0.385,1.146 0.646,1.344 0.26,0.198 10 true (B)

Slightly bend the stoppers (A) and (B) in the directions indicated by the arrows in the illustration and engage the stoppers to install the glove compartment door assembly.

Text in Illustration
*1 Glove Compartment Door Stopper Sub-assembly
*2 Stopper


c.

Engage the claw and connect the glove compartment door stopper sub-assembly.


Hide 55607 27.INSTALL NO. 2 INSTRUMENT PANEL UNDER COVER SUB-ASSEMBLY

a.

Connect the connector.


b.

Engage the guide and 3 claws to install the No. 2 instrument panel under cover sub-assembly.


Hide 62111C 28.INSTALL COWL SIDE TRIM SUB-ASSEMBLY RH

HINT:

Use the same procedure as for the LH side (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION)


Hide 67913 29.INSTALL FRONT DOOR SCUFF PLATE RH

HINT:

Use the same procedure as for the LH side (See page Vehicle Interior>INTERIOR PANELS / TRIM>ROOF HEADLINING>INSTALLATION)


Hide 30.INSTALL UPPER INSTRUMENT PANEL ASSEMBLY