Home › Engine / Hybrid System › 2ZR-FXE (FUEL) › FUEL TANK › from 2020.08
RM2070E _51 Engine / Hybrid System _061908 2ZR-FXE FUEL _0301604 FUEL TANK A

2ZR-FXE FUEL  FUEL TANK  INSTALLATION  


PROCEDURE

Hide 77213E 1.INSTALL FUEL TANK TO FILLER PIPE HOSE

a.
A251229C02
0.406,2.063 0.615,2.271 0.208,0.208 10 false *a 0.938,1.896 1.146,2.104 0.208,0.208 10 false *b 1.083,2.26 1.292,2.469 0.208,0.208 10 false *c 1.083,2.74 1.292,2.948 0.208,0.208 10 false *c
*a Up
*b 90°
*c 60° (Clip Area)


Install the fuel tank to filler pipe hose to the fuel tank as shown in the illustration, then fit the hose with the clamp.


Hide 77754B 2.INSTALL CHARCOAL CANISTER OUTLET HOSE

a.

Connect the No. 1 fuel tube clamp to the fuel tank breather tube.


b.

Install the charcoal canister outlet hose to the No. 1 fuel tube clamp.


Hide 77026A 3.INSTALL NO. 1 FUEL EVAPORATION TUBE SUB-ASSEMBLY

a.

Engage the 2 clamps and install the No. 1 fuel evaporation tube sub-assembly to the fuel tank assembly.


Hide 77209F 4.INSTALL FUEL TANK MAIN TUBE SUB-ASSEMBLY

a.

Engage the 2 clamps and install the fuel tank main tube sub-assembly to the fuel tank assembly.


Hide 77651A 5.INSTALL NO. 1 FUEL TANK CUSHION

a.
A251222E02
1.208,0.167 1.208,0.115 1.208,0.115 2.719,0.115 false 2.344,0.167 2.344,0.115 false 0.875,1.073 0.875,1.573 0.875,1.573 2.938,1.573 false 1.323,0.75 1.323,1.573 false 2.135,0.583 2.135,1.573 false 2.604,1.052 2.604,1.573 false 2.958,1.469 3.115,1.625 0.156,0.156 10 false *1 2.75,0.031 2.906,0.188 0.156,0.156 10 false *2

Install 4 new No. 1 fuel tank cushions as shown in the illustration.

Text in Illustration
*1 No. 1 Fuel Tank Cushion
*2 No. 2 Fuel Tank Cushion


Hide 77652A 6.INSTALL NO. 2 FUEL TANK CUSHION

a.

Install 2 new No. 2 fuel tank cushions as shown in the illustration.


Hide 77100 7.INSTALL FUEL TANK ASSEMBLY

a.

Support the fuel tank using an engine lifter.


b.

Raise the engine lifter, then install the fuel tank to the vehicle.

NOTICE:
·

Do not drop the fuel tank.

·

When installing the fuel tank, tilt it slightly to prevent it from interfering with the suspension arm or other surrounding parts.




c.

Tighten the 4 set bolts of the 2 fuel tank bands.

Torque:
45 N*m (459 kgf*cm, 33 ft.*lbf)


Hide 77209F 8.CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY

a.

Align the quick connector with the pipe, connect the quick connector and push the retainer in until the retainer makes a "click" sound to lock the claws of the retainer.

A398190E01
1.833,3.198 1.99,3.198 1.99,3.198 2.115,3.052 false 4.802,2.01 4.958,2.01 4.958,2.01 5.115,2.177 false 5.927,2.427 6.167,2.01 6.167,2.01 6.344,2.01 false 6.146,2.615 6.302,2.458 6.302,2.458 6.448,2.458 false 6.104,2.813 6.448,2.813 false 5.635,2.969 5.635,2.813 false 5.365,2.969 5.76,2.969 5.76,2.969 5.76,2.823 false 1.646,3.104 1.958,3.302 0.313,0.198 10 false *1 4.573,1.927 4.885,2.125 0.313,0.198 10 false *3 6.385,1.927 6.698,2.125 0.313,0.198 10 false *2 6.479,2.385 6.792,2.583 0.313,0.198 10 false *4 6.479,2.729 6.792,2.927 0.313,0.198 10 false *1 5.177,2.885 5.49,3.083 0.313,0.198 10 false *5

Text in Illustration
*1 Retainer
*2 Fuel Tube Connector
*3 Fuel Tank Main Tube
*4 Fuel Pipe
*5 O-ring
V100135

Push

NOTICE:
·

Check that there are no scratches or foreign matter around the connected part of the fuel tube connector and fuel pipe before starting this step.

·

After connecting the fuel tube connector, check that the fuel tube connector is securely connected by pulling on the fuel tube connector.




Hide 77026A 9.CONNECT NO. 1 FUEL EVAPORATION TUBE SUB-ASSEMBLY

a.
A251228E01
0.961,1.886 1.207,2.091 0.246,0.205 10 *a 1.309,2.582 1.555,2.787 0.246,0.205 10 *b

Connect the No. 1 fuel evaporation tube sub-assembly, then fit it with the clip as shown in the illustration.

Text in Illustration
*a Up
*b 90°

NOTICE:

Check that there is no damage or foreign matter around the connecting parts of the No. 1 fuel evaporation tube sub-assembly and fuel pipe before performing this work.



Hide 77213E 10.CONNECT FUEL TANK TO FILLER PIPE HOSE

a.
A280217E01
0.579,2.125 0.778,2.299 0.199,0.173 10 *a 2.506,2.47 2.706,2.643 0.199,0.173 10 *c 1.136,2.002 1.335,2.175 0.199,0.173 10 *b

Connect the fuel tank to filler pipe hose to the fuel tank, then fit it with the clamp as shown in the illustration.

Text in Illustration
*a Up
*b 2.5 to 5.5 mm (0.0984 to 0.217 in.)
*c 90°


Hide 11.CONNECT FUEL TANK BREATHER TUBE

a.
A251230E02
1.271,0.656 1.531,0.385 1.531,0.385 1.635,0.385 false 1.49,0.896 1.74,0.896 false 1.24,1.146 0.906,0.813 0.906,0.813 0.833,0.813 false 0.656,0.708 0.844,0.896 0.188,0.188 10 false *1 1.76,0.802 1.948,0.99 0.188,0.188 10 false *2 1.656,0.26 1.844,0.448 0.188,0.188 10 false *3 1.875,2.188 2.063,2.375 0.188,0.188 10 false *b 1.948,2.76 2.135,2.948 0.188,0.188 10 false *c 0.5,2.125 0.688,2.313 0.188,0.188 10 false *a

Connect the fuel tank breather tube to the fuel tank as shown in the illustration, then fit it with the clamp.

Text in Illustration
*1 Fuel Tank Breather Tube
*2 Charcoal Canister Outlet Hose
*3 Breather Tube Clamp
*a Up
*b 60°
*c 30°


Hide 77754B 12.CONNECT CHARCOAL CANISTER OUTLET HOSE

a.

Connect the charcoal canister outlet hose.


b.

Connect the charcoal canister outlet hose and fuel tank breather tube to the breather tube clamp.


Hide 77641A 13.INSTALL NO. 1 FUEL TANK PROTECTOR

a.

Install the No. 1 fuel tank protector with the 4 clips.


Hide 53605F 14.INSTALL REAR SUSPENSION BRACE SUB-ASSEMBLY

Hide 57627A 15.INSTALL REAR FLOOR SIDE MEMBER COVER RH

Hide 17410 16.INSTALL FRONT EXHAUST PIPE ASSEMBLY

Hide 77020A 17.INSTALL FUEL SUCTION TUBE WITH PUMP AND GAUGE ASSEMBLY

Hide 18.ADD FUEL

Hide 19.INSPECT FOR EXHAUST GAS LEAK