86792C
1.INSTALL PARKING ASSIST ECU
Engage the claw to install the parking assist ECU.
If the driving support ECU assembly was removed, install it after installing the parking assist ECU (See page Engine / Hybrid System>CRUISE CONTROL>DRIVING SUPPORT ECU>INSTALLATION).
82877
2.INSTALL ECU INTEGRATION BOX RH
Install the ECU integration box RH with the nut and bolt.
Engage each clamp.
Connect each connector.
55480D
3.INSTALL LOWER INSTRUMENT PANEL FINISH PANEL ASSEMBLY
4.CONNECT CABLE TO NEGATIVE AUXILIARY BATTERY TERMINAL
When disconnecting the cable, some systems need to be initialized after the cable is reconnected (See page General>INTRODUCTION>REPAIR INSTRUCTION>INITIALIZATION).
64995
5.INSTALL DECK FLOOR BOX RH
64993
6.INSTALL REAR DECK FLOOR BOX
58411A
7.INSTALL NO. 1 DECK BOARD
58412A
8.INSTALL NO. 2 DECK BOARD
58410B
9.INSTALL DECK BOARD ASSEMBLY