Home › Engine / Hybrid System › 2ZR-FXE (INTAKE / EXHAUST) › EXHAUST MANIFOLD › from 2020.08
RM2070E _51 Engine / Hybrid System _061910 2ZR-FXE INTAKE / EXHAUST _0301618 EXHAUST MANIFOLD A

2ZR-FXE INTAKE / EXHAUST  EXHAUST MANIFOLD  REMOVAL  


PROCEDURE

Hide 1.REMOVE WINDSHIELD WIPER MOTOR AND LINK ASSEMBLY

Hide 55736D 2.REMOVE COWL BODY MOUNTING REINFORCEMENT LH (for LHD)

Hide 55735C 3.REMOVE COWL BODY MOUNTING REINFORCEMENT RH (for RHD)

Hide 55701J 4.REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY (for LHD)

Hide 55701J 5.REMOVE OUTER COWL TOP PANEL SUB-ASSEMBLY (for RHD)

Hide 58151 7.REMOVE FRONT NO. 1 FLOOR HEAT INSULATOR

a.
A212647

Remove the 3 nuts and front No. 1 floor heat insulator.


Hide 17410 10.REMOVE FRONT EXHAUST PIPE ASSEMBLY

a.
A215918

Remove the 4 bolts and 4 compression springs.


b.

Remove the front exhaust pipe assembly from the 3 exhaust pipe supports.


c.

Remove the 2 gaskets from the front exhaust pipe assembly and exhaust manifold.


Hide 58151 11.REMOVE FRONT NO. 1 FLOOR HEAT INSULATOR

Hide 17167 12.REMOVE NO. 1 EXHAUST MANIFOLD HEAT INSULATOR

a.
A212648

Remove the 3 bolts and No. 1 exhaust manifold heat insulator.


Hide 17118 14.REMOVE MANIFOLD STAY

a.
A212649

Remove the 3 bolts and manifold stay.


Hide 17141 15.REMOVE EXHAUST MANIFOLD

a.
A212650

Remove the 7 nuts, exhaust manifold and 2 gaskets.


Hide 17168 16.REMOVE NO. 2 EXHAUST MANIFOLD HEAT INSULATOR

a.
A212651

Remove the 3 bolts and No. 2 exhaust manifold heat insulator.