DTC B2085 Communication Error from Driving Support ECU to VSC ECU |
| DTC No. | DTC Detection Condition | Trouble Area |
| B2085 | The brake booster with master cylinder (skid control ECU) detects an interruption in CAN communication between the driving support ECU and brake booster with master cylinder (skid control ECU) for 1 second or more. |
|
| 1.CHECK DTC OUTPUT (CAN COMMUNICATION SYSTEM) |
Clear the DTCs (Click here).
Check for DTCs.
|
| ||||
| OK | |
| 2.CHECK DTC OUTPUT (PRE-COLLISION SYSTEM) |
Using the Techstream, enter the following menus: Body Electrical / Pre-Collision / Trouble Codes.
Clear the DTCs (Click here).
Check for DTCs.
|
| ||||
| OK | ||
| ||