Home › Vehicle Interior › SEAT BELT › FRONT SEAT INNER BELT ASSEMBLY
RM3210E _58 Vehicle Interior _047538 SEAT BELT _0234840 FRONT SEAT INNER BELT ASSEMBLY A

SEAT BELT  FRONT SEAT INNER BELT ASSEMBLY  INSTALLATION  


CAUTION / NOTICE / HINT

HINT:
·

Use the same procedure for the RH side and LH side.

·

The following procedure is for the LH side.



PROCEDURE

Hide 73240 1.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Driver Side)

a.
B435004C02
0,0 0,0 false
V113147

Install in this Direction


Install the front seat belt anchor plate as shown in the illustration.


b.

for Manual Seat:

i.
B442321C02
1.125,3.104 1.354,2.958 true 1,3.115 1.219,3.333 0.219,0.219 10 true *a
*a Protruding Part


Install the front seat inner belt assembly with the nut.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the separate type front seat cushion spring assembly.



ii.

Engage the 2 clamps.



c.

for Power Seat:

i.
B442326C02
1.188,3.094 1.448,2.896 true 1.073,3.115 1.292,3.323 0.219,0.208 10 true *a
*a Protruding Part


Install the front seat inner belt assembly with the nut.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the separate type front seat cushion spring assembly.



ii.

Engage the 2 clamps.



d.

Engage each clamp.


e.

Connect each connector.


Hide 73230 2.INSTALL FRONT SEAT INNER BELT ASSEMBLY (for Front Passenger Side)

a.
B435003C02
0,0 0,0 false
V113147

Install in this Direction


Install the front seat belt anchor plate as shown in the illustration.


b.
B435005C01
2.042,2.979 2.271,3.073 true 2.323,3.031 2.573,3.271 0.25,0.24 10 true *a
*a Protruding Part


Install the front seat inner belt assembly with the nut.

Torque:
42 N*m (428 kgf*cm, 31 ft.*lbf)

NOTICE:

Do not allow the anchor part of the front seat inner belt assembly to overlap the protruding part of the separate type front seat cushion spring assembly.


i.

Engage the clamp.



c.

Engage each clamp.


d.

Connect each connector.


Hide 3.INSTALL FRONT SEAT ASSEMBLY (for Manual Seat)

Hide 4.INSTALL FRONT SEAT ASSEMBLY (for Power Seat)