Home › Steering › STEERING COLUMN › STEERING WHEEL
RM3210E _55 Steering _047548 STEERING COLUMN _0242571 STEERING WHEEL A

STEERING COLUMN  STEERING WHEEL  INSTALLATION  


CAUTION / NOTICE / HINT

NOTICE:
·

Do not replace the spiral cable with sensor sub-assembly with the auxiliary battery connected and the power switch on (IG).

·

Do not rotate the spiral cable with sensor sub-assembly without the steering wheel assembly installed with the auxiliary battery connected and the power switch on (IG).

·

Ensure that the steering wheel assembly is installed and aligned straight when inspecting the steering sensor.



PROCEDURE

Hide 45184 1.INSTALL LOWER STEERING WHEEL BOSS COVER

a.
C345197

Engage the 6 claws and 4 pins to install the lower steering wheel boss cover to the steering wheel sub-assembly.


Hide 84250A 2.INSTALL STEERING PAD SWITCH ASSEMBLY

Hide 84633 3.INSTALL CRUISE CONTROL SWITCH WIRE

a.

Install the cruise control switch wire.


Hide 84632 4.INSTALL CRUISE CONTROL MAIN SWITCH

Hide 5.ALIGN FRONT WHEELS FACING STRAIGHT AHEAD

Hide 84307 6.INSPECT AND ADJUST SPIRAL CABLE WITH SENSOR SUB-ASSEMBLY

Hide 45100 7.INSTALL STEERING WHEEL ASSEMBLY

a.
C345215C01
0.333,0.656 1.698,0.656 true 0.646,0.667 0.646,0.74 0.646,0.74 1.698,0.74 true 0.156,0.563 0.469,0.719 0.313,0.156 10 false *a
*a Matchmark


Align the matchmarks on the steering wheel assembly and steering main shaft to install the steering wheel assembly.


b.

Install the steering wheel assembly set nut.

Torque:
50 N*m (510 kgf*cm, 37 ft.*lbf)


c.
C345192

Connect 2 connectors to the spiral cable with sensor sub-assembly.


Hide 8.CHECK STEERING WHEEL CENTER POINT

Hide 45130 9.INSTALL HORN BUTTON ASSEMBLY