This DTC is stored when a malfunction occurs in the speakers.
| DTC No. | Detection Item | DTC Detection Condition | Trouble Area |
|---|---|---|---|
| B15C3 | Speaker Output Short | A short is detected in the speaker output circuit | ·
Harness or connector ·
Speaker ·
Radio and display receiver assembly*1 ·
Stereo Component Amplifier*2 |
*1: for 6 Speakers
*2: for 10 Speakers
Choose the model to be inspected.
| Result | Proceed to |
|---|---|
| for 6 Speakers | A |
| for 10 Speakers | B |
A
B
Disconnect the F32 and F33 radio and display receiver assembly connectors.
Disconnect the G3 and G6 front No. 2 speaker assembly connectors.
Disconnect the K4 and L5 rear speaker assembly connectors.
Measure the resistance between the radio and display receiver assembly and body ground to check for a short circuit in the wire harness.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| F32-1 (FR+) or G3-4 (TWR+) - Body ground | Always | 10 kΩ or higher |
| F32-5 (FR-) or G3-2 (TWR-) - Body ground | Always | 10 kΩ or higher |
| F32-2 (FL+) or G6-4 (TWL+) - Body ground | Always | 10 kΩ or higher |
| F32-6 (FL-) or G6-2 (TWL-) - Body ground | Always | 10 kΩ or higher |
| F33-1 (RR+) or K4-1 - Body ground | Always | 10 kΩ or higher |
| F33-3 (RR-) or K4-2 - Body ground | Always | 10 kΩ or higher |
| F33-2 (RL+) or L5-1 - Body ground | Always | 10 kΩ or higher |
| F33-6 (RL-) or L5-2 - Body ground | Always | 10 kΩ or higher |
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Disconnect the I1 and J1 front No. 1 speaker assembly connectors.
Disconnect the G3 and G6 front No. 2 speaker assembly connectors.
Measure the resistance between each of the front No. 2 speaker assemblies and body ground to check for a short circuit in the wire harness.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| G3-3 (+) or I1-1 - Body ground | Always | 10 kΩ or higher |
| G3-1 (-) or I1-2 - Body ground | Always | 10 kΩ or higher |
| G6-3 (+) or J1-1 - Body ground | Always | 10 kΩ or higher |
| G6-1 (-) or J1-2 - Body ground | Always | 10 kΩ or higher |
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Remove the front No. 1 speaker assembly.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>FRONT DOOR SPEAKER>REMOVAL
Inspect the front No. 1 speaker assembly.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>FRONT DOOR SPEAKER>INSPECTION
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Remove the front No. 2 speaker assembly.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>INSTRUMENT PANEL SPEAKER>REMOVAL
Inspect the front No. 2 speaker assembly.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>INSTRUMENT PANEL SPEAKER>INSPECTION
Clear the DTCs.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM>DTC CHECK / CLEAR
Recheck for DTCs and check that no DTCs are output.
No DTCs are output.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Remove the rear speaker assembly.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>REAR DOOR SPEAKER>REMOVAL
Inspect the rear speaker assembly.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>REAR DOOR SPEAKER>INSPECTION
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Disconnect the F60 stereo component amplifier assembly connector.
Disconnect the I1 and J1 front No. 1 speaker assembly connectors.
Disconnect the G4 and G5 front No. 2 speaker assembly connectors.
Disconnect the K4 and L5 rear speaker assembly connectors.
Measure the resistance between the stereo component amplifier assembly and body ground to check for a short circuit in the wire harness.
| Tester Connection | Condition | Specified Condition |
|---|---|---|
| F60-15 (FR+) or I1-1 - Body ground | Always | 10 kΩ or higher |
| F60-30 (FR-) or I1-2 - Body ground | Always | 10 kΩ or higher |
| F60-8 (FL+) or J1-1 - Body ground | Always | 10 kΩ or higher |
| F60-23 (FL-) or J1-2 - Body ground | Always | 10 kΩ or higher |
| F60-13 (TWR+) or G4-4 - Body ground | Always | 10 kΩ or higher |
| F60-28 (TWR-) or G4-3 - Body ground | Always | 10 kΩ or higher |
| F60-10 (TWL+) or G5-4 - Body ground | Always | 10 kΩ or higher |
| F60-25 (TWL-) or G5-3 - Body ground | Always | 10 kΩ or higher |
| F60-11 (RR+) or K4-1 - Body ground | Always | 10 kΩ or higher |
| F60-26 (RR-) or K4-2 - Body ground | Always | 10 kΩ or higher |
| F60-12 (RL+) or L5-1 - Body ground | Always | 10 kΩ or higher |
| F60-27 (RL-) or L5-2 - Body ground | Always | 10 kΩ or higher |
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Remove the front No. 2 speaker assembly.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>INSTRUMENT PANEL SPEAKER>REMOVAL
Inspect the front No. 2 speaker assembly.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>INSTRUMENT PANEL SPEAKER>INSPECTION
Clear the DTCs.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>AUDIO AND VISUAL SYSTEM>DTC CHECK / CLEAR
Recheck for DTCs and check that no DTCs are output.
No DTCs are output.
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Remove the front No. 1 speaker assembly.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>FRONT DOOR SPEAKER>REMOVAL
Inspect the front No. 1 speaker assembly.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>FRONT DOOR SPEAKER>INSPECTION
| Proceed to |
|---|
| OK |
| NG |
OK
NG
Remove the rear speaker assembly.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>REAR DOOR SPEAKER>REMOVAL
Inspect the rear speaker assembly.
Click hereAudio / Visual / Telematics>AUDIO / VIDEO>REAR DOOR SPEAKER>INSPECTION
| Proceed to |
|---|
| OK |
| NG |
OK
NG