Home › Vehicle Interior › THEFT DETERRENT / KEYLESS ENTRY › IMMOBILISER SYSTEM
RM3210E _58 Vehicle Interior _047507 THEFT DETERRENT / KEYLESS ENTRY _0244661 IMMOBILISER SYSTEM T

THEFT DETERRENT / KEYLESS ENTRY  IMMOBILISER SYSTEM  PROBLEM SYMPTOMS TABLE  


HINT:
·

Inspect the fuses and relays related to this system before inspecting the suspected areas below.

·

If the problem only occurs in certain locations or at certain times of day, check for wave interference.

·

If optional components are installed, check for wave interference from the components.



Immobiliser System
Symptom Suspected Area Link
Security indicator light does not blink Proceed to "Security Indicator Light Does not Blink" Click here
Immobiliser system does not operate properly Proceed to "Immobiliser System does not Operate Properly" Click here
Hybrid control system cannot be started*1 Certification ECU (Smart key ECU assembly) Click here
Hybrid vehicle control ECU Click here
Hybrid control system Click here
Power source mode cannot be changed*1 Power switch Click here
Certification ECU (Smart key ECU assembly) -
Gearshift control lock/unlock not possible*2 Hybrid vehicle control ECU Click here

*1: Refer to Problem Symptoms Table for Entry and Start System (for Start Function).

*2: Refer to Problem Symptoms Table for Electronic Shift Lever System.