Home › Vehicle Interior › SEAT BELT › SEAT BELT WARNING SYSTEM(w/ Occupant Classification System)
RM3210E _58 Vehicle Interior _047538 SEAT BELT _0244926 SEAT BELT WARNING SYSTEM(w/ Occupant Classification System) J

SEAT BELT  SEAT BELT WARNING SYSTEM(w/ Occupant Classification System)  Front Passenger Side Seat Belt Warning Light Malfunction  


DESCRIPTION

When the power switch is turned on (IG), the occupant detection ECU sends signals to the airbag ECU assembly to indicate the state of the front seat inner belt assembly RH and also whether the front passenger seat is occupied. The airbag ECU assembly sends those signals to the combination meter assembly via CAN communication. The seat belt warning light on the combination meter assembly illuminates, blinks or turns off in accordance with these signals.

WIRING DIAGRAM

B441509E01
2.51,3.552 7.156,3.75 4.646,0.198 10 false Front Seat Inner Belt Assembly RH 5.302,1.677 7.125,2.021 1.823,0.344 10 false Combination Meter Assembly 5.531,3.042 7.052,3.375 1.521,0.333 10 false Airbag ECU Assembly 2.51,3.385 2.823,3.583 0.313,0.198 10 false a9 2.115,2.969 2.427,3.167 0.313,0.198 10 false a8 2.115,2.167 2.427,2.365 0.313,0.198 10 false a8 2.135,4.104 2.448,4.302 0.313,0.198 10 false a7 2.146,4.583 2.458,4.781 0.313,0.198 10 false a7 2.135,5.063 2.448,5.26 0.313,0.198 10 false a7 2.146,6.24 2.458,6.438 0.313,0.198 10 false a7 2.146,6.719 2.458,6.917 0.313,0.198 10 false a7 2.135,7.198 2.448,7.396 0.313,0.198 10 false a7 2.927,2.073 3.24,2.271 0.313,0.198 10 false 1 2.927,2.875 3.24,3.073 0.313,0.198 10 false 2 2.156,1.969 2.469,2.167 0.313,0.198 10 false 7 2.146,2.76 2.458,2.958 0.313,0.198 10 false 9 1.615,2.177 1.99,2.365 0.375,0.188 10 false BSW 1.573,2.969 2.083,3.177 0.51,0.208 10 false BGND 5.698,4.094 6.208,4.302 0.51,0.208 10 false SVC 5.698,4.594 6.208,4.802 0.51,0.208 10 false SIG 5.698,5.063 6.208,5.271 0.51,0.208 10 false SGD 5.688,6.24 6.198,6.448 0.51,0.208 10 false SVC 1.594,4.104 2.104,4.313 0.51,0.208 10 false SVC1 1.604,6.24 2.115,6.448 0.51,0.208 10 false SVC3 1.646,4.594 2.156,4.802 0.51,0.208 10 false SIG1 1.646,6.719 2.156,6.927 0.51,0.208 10 false SIG3 5.688,6.708 6.198,6.917 0.51,0.208 10 false SIG 1.573,5.073 2.083,5.281 0.51,0.208 10 false SGD1 1.594,7.208 2.104,7.417 0.51,0.208 10 false SGD3 5.688,7.198 6.198,7.406 0.51,0.208 10 false SGD 2.146,3.854 2.458,4.052 0.313,0.198 10 false 1 2.156,6.042 2.469,6.24 0.313,0.198 10 false 2 2.156,4.385 2.49,4.729 0.333,0.344 10 false 3 2.167,4.865 2.479,5.063 0.313,0.198 10 false 5 5.531,4.479 5.844,4.677 0.313,0.198 10 false 2 5.531,4 5.844,4.198 0.313,0.198 10 false 1 5.521,6.135 5.833,6.333 0.313,0.198 10 false 1 5.531,6.615 5.844,6.813 0.313,0.198 10 false 2 5.531,4.958 5.865,5.302 0.333,0.344 10 false 3 5.531,7.094 5.865,7.438 0.333,0.344 10 false 3 2.156,6.521 2.469,6.719 0.313,0.198 10 false 4 2.167,7 2.479,7.198 0.313,0.198 10 false 6 5.323,5.323 5.833,5.531 0.51,0.208 10 false a10 5.24,7.458 5.75,7.667 0.51,0.208 10 false a11 0.51,7.656 5.156,7.854 4.646,0.198 10 false Occupant Detection ECU 0.625,8.365 5.271,8.563 4.646,0.198 10 false : CAN Communication Line 5.313,5.479 7.125,5.823 1.813,0.344 10 false Front Occupant Classification Sensor LH 5.24,7.635 7.052,7.979 1.813,0.344 10 false Rear Occupant Classification Sensor LH 3.104,2.073 3.417,2.271 0.313,0.198 10 false + 3.104,2.865 3.417,3.063 0.313,0.198 10 false - 5.344,1.969 7.156,2.188 1.813,0.219 10 false - Meter Circuit Plate

CAUTION / NOTICE / HINT

NOTICE:

The seat belt warning system uses the CAN communication system. First, confirm that there are no malfunctions in the CAN communication system. Refer to How to Proceed with Troubleshooting.

Click hereVehicle Interior>SEAT BELT>SEAT BELT WARNING SYSTEM(w/ Occupant Classification System)>HOW TO PROCEED WITH TROUBLESHOOTING


HINT:

The seat belt warning light on the combination meter assembly is used for both the driver seat and front passenger seat.Check that the operation of the seat belt warning light is normal first.

Click hereVehicle Interior>SEAT BELT>SEAT BELT WARNING SYSTEM(w/ Occupant Classification System)>ON-VEHICLE INSPECTION

If the seat belt warning light does not operate for both the driver seat and front passenger seat, replace the meter circuit plate.

Click hereVehicle Interior>METER / GAUGE / DISPLAY>COMBINATION METER>REMOVAL


PROCEDURE

1.CHECK DTC OUTPUT (OCCUPANT CLASSIFICATION SYSTEM)
a.

Clear the DTCs.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>OCCUPANT CLASSIFICATION SYSTEM>DTC CHECK / CLEAR

Body Electrical > Occupant Detection > Clear DTCs
50002 394

b.

Check for DTCs.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>OCCUPANT CLASSIFICATION SYSTEM>DTC CHECK / CLEAR

Body Electrical > Occupant Detection > Trouble Codes
50001 394
Result:
Result Proceed to
DTCs are not output A
DTCs are output B




A

2.CHECK DTC OUTPUT (AIRBAG SYSTEM)

B

2.CHECK DTC OUTPUT (AIRBAG SYSTEM)
a.

Clear the DTCs.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR

Body Electrical > SRS Airbag > Clear DTCs
50002 188

b.

Check for DTCs.

Click hereVehicle Interior>SUPPLEMENTAL RESTRAINT SYSTEMS>AIRBAG SYSTEM>DTC CHECK / CLEAR

Body Electrical > SRS Airbag > Trouble Codes
50001 188
Result:
Result Proceed to
DTCs are not output A
DTCs are output B




A

3.READ VALUE USING GTS

B

3.READ VALUE USING GTS
a.

Connect the GTS to the DLC3.


b.

Turn the power switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / Occupant Detection / Data List.


e.

Read the Data List according to the display on the GTS.

Body Electrical > Occupant Detection > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Passenger Buckle SW Front passenger buckle switch Unset, Set or NG Unset: Seat belt not fastened
Set: Seat belt fastened
NG: Data is not determined
-
Body Electrical > Occupant Detection > Data List
Tester Display
Passenger Buckle SW
50003 394 24
Result:
Result Proceed to
Unset or Set is displayed on the GTS according to the front passenger seat belt condition A
Unset or Set is not displayed correctly on the GTS according to the front passenger seat belt condition B
NG is displayed on the GTS C




A

4.READ VALUE USING GTS

B

REPLACE FRONT SEAT INNER BELT ASSEMBLY RH

C

4.READ VALUE USING GTS
a.

Connect the GTS to the DLC3.


b.

Turn the power switch on (IG).


c.

Turn the GTS on.


d.

Enter the following menus: Body Electrical / SRS Airbag / Data List.


e.

Read the Data List according to the display on the GTS.

Body Electrical > SRS Airbag > Data List
Tester Display Measurement Item Range Normal Condition Diagnostic Note
Right side Buckle SW RH buckle switch Unset, Set or NG Unset: Seat belt not fastened
Set: Seat belt fastened
NG: Data is not determined
-
Body Electrical > SRS Airbag > Data List
Tester Display
Right side Buckle SW
50003 188 5
Result:
Result Proceed to
Unset or Set is displayed on the GTS according to the front passenger seat belt condition A
·

Unset or Set is not displayed correctly on the GTS according to the front passenger seat belt condition

·

NG is displayed on the GTS


B




A

B