2005-2008 RAV4 · Service Manual BRAKE

C1201 Engine Control System Malfunction

Diagnostic trouble codes · Vehicles built from Aug 2008

DESCRIPTION

If a malfunction in the engine control system is detected, the operation of VSC and TRC is prohibited by the fail-safe function. When the signals from the engine are input normally, the fail-safe control is canceled and the DTC is not stored.
DTC Code
DTC Detection Condition
Trouble Area
C1201
Engine control system malfunction signal continues for 1 second or more.
Engine control system

INSPECTION PROCEDURE


1. CHECK ENGINE CONTROL SYSTEM
  1. for 2AZ-FE:Check if any engine control system DTC is output (Click here).

  1. for 2GR-FE:Check if any engine control system DTC is output (Click here).

    Result:
    Result
    Proceed to
    DTC is not output.
    for 2AZ-FE
    A
    for 2GR-FE
    B
    DTC is output.
    for 2AZ-FE
    C
    for 2GR-FE
    D



B
REPLACE ECM (Click here)

C
INSPECT ENGINE CONTROL SYSTEM (for DTC) (Click here)

D
INSPECT ENGINE CONTROL SYSTEM (for DTC) (Click here)
A

REPLACE ECM (Click here)


← C0371 Yaw Rate Sensor (Test Mode DTC) (+ C1279) (from Aug 2008)C1201/51 Engine Control System Malfunction (Nov 2005 – Dec 2006) →