2005-2008 RAV4 · Service Manual ENGINE

INSTALLATION

Removal / installation · Vehicles built Aug 2007 – Jul 2008

Versions by build date: Aug 2007 – Jul 2008 from Aug 2008


1. INSTALL FUEL SUCTION WITH PUMP ASSEMBLY

  1. A126699E02
    Install a new gasket onto the fuel suction with pump assembly.

  1. A131634
    Connect the fuel hose and install the fuel suction with pump assembly into the fuel tank.


2. INSTALL FUEL TANK VENT TUBE SET PLATE

  1. A124675
    Install the set plate with the 8 bolts.

    Torque:
    4.0 N*m{ 41 kgf*cm , 35 in.*lbf }


3. CONNECT FUEL TANK MAIN TUBE SUB-ASSEMBLY

  1. A124668
    Install the fuel tube with the joint clip.

    CAUTION:
    A124131E01
    1. Check that there are no scratches or foreign objects on the connecting parts.
    1. Check that the fuel tube joint is inserted securely.
    1. Check that the fuel tube joint clip is on the collars of the fuel tube joint.
    1. After installing the tube joint clip, check that the fuel tube joint has not been pulled off.
    1. Be careful not to damage the clip. If the clip is damaged, replace it.


4. CONNECT FUEL EMISSION HOSE

  1. A124674
    Install the purge line hose, air inlet line hose and EVAP line tube to the fuel pump.


5. INSTALL FUEL TANK ASSEMBLY
  1. Install the fuel tank assembly (Click here).

← REASSEMBLY (Aug 2007 – Jul 2008)INSTALLATION (from Aug 2008) →