HOW TO PROCEED WITH TROUBLESHOOTING
Troubleshooting · Vehicles built from Nov 2005
- HINT:
- Use these procedures to troubleshoot the tire pressure warning system.
- *: Use the intelligent tester.
- Use these procedures to troubleshoot the tire pressure warning system.
| 1.VEHICLE BROUGHT TO WORKSHOP |
| |||||
| 2.INSPECT BATTERY VOLTAGE |
- Standard voltage:
- 11 to 14 V
| |||||
| 3.CHECK INDICATOR LIGHT |
| |||||
| 4.CHECK DTC* |
Check for DTC (Click here).
Delete the DTC (Click here).
Recheck for DTC (Click here).
ResultĀ Result
Proceed to
DTC reoccurs
A
DTC does not reoccur
B
|
|||||
| |||||
| 5.DTC CHART |
Check for tire pressure warning system DTC output (Click here).
| |||||
| 6.PROBLEM SYMPTOM CONFIRMATION |
| |||||
| 7.PROBLEM SYMPTOMS TABLE |
| Result |
Proceed to |
| Fault is not listed in problem symptoms table |
A |
| Fault is listed in problem symptoms table |
B |
|
|||||
| |||||
| 8.OVERALL ANALYSIS AND TROUBLESHOOTING* |
Terminals of ECU (Click here).
Data List / Active Test (Click here).
| |||||
| 9.REPAIR OR REPLACE |
| |||||
| 10.CONFIRMATION TEST |
| |||||